Add links to source files

1 files changed, 10 insertions, 19 deletions

diff --git a/arduino/Laserharfe/Laserharfe.ino b/arduino/Laserharfe/Laserharfe.ino
index 9f0d025..d8a7c6f 100644
--- a/arduino/Laserharfe/Laserharfe.ino
+++ b/arduino/Laserharfe/Laserharfe.ino
@@ -9,8 +9,9 @@
 #include "MIDIUSB.h"
 #include <Wire.h>
 
-#include "engine.h"
+#include "main.h"
 #include "config.h"
+#include "engine.h"
 
 int led = 13;
 
@@ -20,23 +21,10 @@ enum {
   MODE_REPORTPOINTS_PLAY = 2,
 } g_mode = MODE_REPORTPOINTS_PLAY;
 
-/*
-// First parameter is the event type (0x09 = note on, 0x08 = note off).
-// Second parameter is note-on/note-off, combined with the channel.
-// Channel can be anything between 0-15. Typically reported to the user as 1-16.
-// Third parameter is the note number (48 = middle C).
-// Fourth parameter is the velocity (64 = normal, 127 = fastest).
-void noteOn(byte channel, byte pitch, byte velocity) {
-  midiEventPacket_t noteOn = {0x09, 0x90 | channel, pitch, velocity};
-  MidiUSB.sendMIDI(noteOn);
+uint32_t now() {
+  return millis();
 }
 
-void noteOff(byte channel, byte pitch, byte velocity) {
-  midiEventPacket_t noteOff = {0x08, 0x80 | channel, pitch, velocity};
-  MidiUSB.sendMIDI(noteOff);
-}
-*/
-
 void setup_pwm() {
   // Set up the generic clock (GCLK4) used to clock timers
   REG_GCLK_GENDIV = GCLK_GENDIV_DIV(1) |          // Divide the 48MHz clock source by divisor 2: 48MHz/2=24MHz
@@ -152,8 +140,9 @@ void handle_wire() {
   if (p1.x==1023 && p2.x==1023 && p3.x==1023 && p4.x==1023)
     return;
 
-  long now = millis();
+  uint32_t now = millis();
   if (g_mode==MODE_STANDALONE || g_mode==MODE_REPORTPOINTS_PLAY) {
+/*
     if (p1.x!=1023)
       engine_handle_point(&p1, now);
     if (p2.x!=1023)
@@ -162,6 +151,7 @@ void handle_wire() {
       engine_handle_point(&p3, now);
     if (p4.x!=1023)
       engine_handle_point(&p4, now);
+*/
   }
 
   if (g_mode==MODE_STANDALONE)
@@ -214,7 +204,8 @@ void midi_silencenote( int channel, int note, int octave_offset ) {
 void midi_pitchbend( int channel, int pitch ) {
   pitch += 8192;
   if (pitch < 0) pitch = 0;
-  if (pitch > 16383) pitch = 16383,
+  if (pitch > 16383) pitch = 16383;
+
   midiEventPacket_t p = { 0xe, 0xe0 | channel, 0x7f & pitch, 0x7f & (pitch>>7) };
   MidiUSB.sendMIDI(p);
 }
@@ -295,7 +286,7 @@ void loop() {
   delay(1500);
 */
 
-  engine_checksilence(millis());
+  //engine_checksilence(millis());
   digitalWrite(led, ++led_state & 1 ? HIGH : LOW);   // turn the LED on (HIGH is the voltage level)
 }