From 71cabadee7b59a1ebac99aacb0121b3e43b89b89 Mon Sep 17 00:00:00 2001 From: erdgeist <> Date: Sat, 6 Dec 2003 19:59:06 +0000 Subject: LANMAN --- doc/cifsrap2.txt | 2427 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2427 insertions(+) create mode 100755 doc/cifsrap2.txt (limited to 'doc/cifsrap2.txt') diff --git a/doc/cifsrap2.txt b/doc/cifsrap2.txt new file mode 100755 index 0000000..64a2cd7 --- /dev/null +++ b/doc/cifsrap2.txt @@ -0,0 +1,2427 @@ + + + + + + +Network Working Group Paul J. Leach, Microsoft +INTERNET-DRAFT Dilip C. Naik, Microsoft +draft-leach-cifs-rap-spec-00.txt +Category: Informational +Expires August 26, 1997 February 26, 1997 + + CIFS Remote Administration Protocol + Preliminary Draft + +STATUS OF THIS MEMO + +THIS IS A PRELIMINARY DRAFT OF AN INTERNET-DRAFT. IT DOES NOT REPRESENT +THE CONSENSUS OF THE ANY WORKING GROUP. + +This document is an Internet-Draft. Internet-Drafts are working +documents of the Internet Engineering Task Force (IETF), its areas, and +its working groups. Note that other groups may also distribute working +documents as Internet-Drafts. + +Internet-Drafts are draft documents valid for a maximum of six months +and may be updated, replaced, or obsoleted by other documents at any +time. It is inappropriate to use Internet-Drafts as reference material +or to cite them other than as "work in progress". + +To learn the current status of any Internet-Draft, please check the +"1id-abstracts.txt" listing contained in the Internet-Drafts Shadow +Directories on ftp.is.co.za (Africa), nic.nordu.net (Europe), +munnari.oz.au (Pacific Rim), ds.internic.net (US East Coast), or +ftp.isi.edu (US West Coast). + +Distribution of this document is unlimited. Please send comments to the +authors or the CIFS mailing list at . +Discussions of the mailing list are archived at +. + + +ABSTRACT + +This specification defines how an RPC like mechanism may be implemented +using the Common Internet File System (CIFS) Transact SMB. Specific +examples are provided of how a CIFS client may request a CIFS server to +execute a function. The examples show complete details of the request +sent by the CIFS client and the response from the CIFS server. + + +Table of Contents + + +1.OBJECTIVE...........................................................2 + +2.PREREQUISITES AND SUGGESTED READING.................................2 + +3.REMOTE ADMINISTRATION PROTOCOL OVERVIEW.............................3 + + + + +Leach, Naik [Page 1] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +4.REMOTE ADMINISTRATION PROTOCOL......................................3 + + 4.1 NOTATION.........................................................4 + 4.2 DESCRIPTORS......................................................5 + 4.2.1Request Parameter Descriptors.................................5 + 4.2.2Response Parameter Descriptors................................5 + 4.2.3Data Descriptors..............................................6 + 4.3 TRANSACTION REQUEST PARAMETERS SECTION...........................6 + 4.4 TRANSACTION REQUEST DATA SECTION.................................7 + 4.5 TRANSACTION RESPONSE PARAMETERS SECTION..........................7 + 4.6 TRANSACTION RESPONSE DATA SECTION................................7 + +5.NETSHAREENUM........................................................8 + +6.NETSERVERENUM2.....................................................10 + +7.NETSERVERGETINFO...................................................13 + +8.NETSHAREGETINFO....................................................15 + +9.NETWKSTAUSERLOGON..................................................19 + +10. NETWKSTAUSERLOGOFF...............................................24 + +11. NETUSERGETINFO...................................................26 + +12. NETWKSTAGETINFO..................................................30 + +13. SAMOEMCHANGEPASSWORD.............................................32 + +14. AUTHOR'S ADDRESSES...............................................34 + +15. APPENDIX A.......................................................34 + + 15.1.1...................................................TRANSACTIONS 36 + +16. APPENDIX B.......................................................38 + + 16.1MARSHALING AND UNMARSHALING USING DESCRIPTOR STRINGS............38 + + + + +1. Objective + +This document details an RPC like mechanism used by CIFS clients to +submit requests to CIFS servers and obtain the results of the request +back from the server. + +For convenience, some sections from the CIFS specification have been +reproduced in part within this document. Note that the CIFS +specification should be considered to be the authoritative reference, in +case of any doubts, rather than this document. + +2. Prerequisites and suggested reading + + + + +Leach, Naik [Page 2] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +@ Familiarity with Common Internet File Systems specification (CIFS) + + +3. Remote Administration Protocol overview + +The Remote Administration Protocol (RAP) is similar to an RPC protocol, +in that: +@ it is an at-most-once synchronous request-response protocol +@ it is a framework that can be used for remotely requesting many + different kinds of services +@ it is designed to allow (but not require) the programming interface + to the protocol to be that of remotely executed procedure calls – + which means that one thinks if the protocol in terms of marshaling + and unmarshaling procedure call input and output arguments into + messages and reliably transporting the messages to and from the + client and server +Each RAP request is characterized by a set of ASCII descriptor strings +that are sufficient to be used to interpretively drive the marshaling +and unmarshaling process, if an implementation wanted to use them for +that purpose. These descriptor strings are included in each request +packet, and make the requests self-describing. + +RAP is layered on the CIFS Transact SMB, which provides reliable message +delivery, security, and messages larger than the underlying network +maximum packet size. When used for RAP, the name field in the Transact +SMB is always set to "\PIPE\LANMAN". The Transact SMB is sent on a +session/connection that is established to the remote server using a +SessionSetupAndX SMB, and using a TID obtained by doing a +TreeConnectAndX SMB to a share named "IPC$". + +[Refer to the CIFS specification for complete details on SMBs in +general, and the Transact SMB in particular. For convenience, relevant +portions from the CIFS specification have been reproduced here in +Appendix A. Note that the CIFS specification should be considered the +authoritative source of information, rather than Appendix A as far as +details on the Transact SMB are concerned.] + +The model of a RAP service is that there are a few parameters as inputs +and outputs to the service, exactly one of which may be a buffer +descriptor that indicates the presence of a potentially much larger +input or output data buffer. An argument may be a scalar, pointer, fixed +length small array or struct, or a buffer descriptor. The data buffer +consists of entries followed by a heap. An entry consists of a primary +data struct and a sequence of 0 or more auxiliary data structs. An +input buffer must contain exactly one entry; an output buffer may +contain 0 or more. The heap is where data is stored that is referenced +by pointers in the entries. The parameters are described by a parameter +descriptor string; the primary data struct by a data descriptor string; +and the auxiliary data structs by an auxiliary data descriptor string. + + +4. Remote Administration Protocol + + + + +Leach, Naik [Page 3] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +A RAP service request is sent to the server encapsulated in a Transact +request SMB and the server sends back a Transact SMB response. An +attribute of the Transact SMB is that it divides the payload of request +and response messages into two sections: a parameters section and a data +section. As might be expected from the nomenclature, RAP service +parameters are sent in the parameters section of a Transact SMB, and the +data buffer in the data section. Therefore, to define a service +protocol, it is necessary to define the formats of the parameter and +data sections of the Transact request and response. + +This is done in two stages. First, a C-like declaration notation is used +to define descriptor strings, and then the descriptor strings define the +formats of the parameter and data sections.. Note well: even though the +declarations may look like a programming interface, they are not: they +are a notation for describing the contents of RAP requests and +responses; an implementation on any particular system can use any +programming interface to RAP services that is appropriate to that +system. + +4.1 Notation + +Parameter descriptor strings are defined using a C-like function +declaration; data descriptor and auxiliary data descriptor strings are +defined using a C-like structure declaration. + +Parameter descriptor strings are defined with the following C-like +function declaration syntax: + + rap-service = "unsigned short" service-name "(" parameters ");" + service-name = +The return type of the function is always "unsigned short", and +represents the status code from the function. The service-name is for +documentation purposes. + + parameters = parameter [ ";" parameter ] +The parameter descriptor string for the service is the concatenation of +the descriptor characters for the parameters. + + parameter = [ "const" ] param-data-type parameter-name + [ "[" size "]" ] + param-data-type = + parameter-name = + size = +The descriptor character for a parameter is determined by looking up the +data-type in the tables below for request or response parameter +descriptors. The parameter-name is for documentation purposes. If there +is a size following the parameter-name, then it is placed in the +descriptor string following the descriptor character. + +Data and auxiliary data descriptor strings are defined with the +following C-like structure declaration syntax: + + rap-struct = "struct" struct-name "{" members "}" +The descriptor string for the struct is the concatenation of the +descriptor characters for the members. The struct-name is for +documentation purposes. + + members = member [ ";" member ] + member = member-data-type member-name [ "[" size "]" ] + + +Leach, Naik [Page 4] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + + member-data-type = +The descriptor character for a member is determined by looking up the +data-type in the tables below for data descriptors. The member-name is +for documentation purposes. If there is a size following the member- +name, then it is placed in the descriptor string following the +descriptor character. + +4.2 Descriptors + +The following section contain tables that specify the descriptor +character and the notation for each data type for that data type. + +4.2.1 Request Parameter Descriptors + + +Descriptor Data Type Format +========== ========= ===== +W unsigned short indicates parameter type of 16 bit integer + (word). +D unsigned long indicates parameter type of 32 bit integer + (dword). +b BYTE indicates bytes (octets). May be followed + by an ASCII number indicating number of + bytes.. +O NULL indicates a NULL pointer +z char indicates a NULL terminated ASCII string + present in the parameter area +F PAD indicates Pad bytes (octets). May be + followed by an ASCII number indicating the + number of bytes +r RCVBUF pointer to receive data buffer in response + parameter section +L RCVBUFLEN 16 bit integer containing length of + receive data buffer in (16 bit) words +s SNDBUF pointer to send data buffer in request + parameter section +T SNDBUFLEN 16 bit integer containing length of send + data buffer in words + + +4.2.2 Response Parameter Descriptors + + +Descriptor Data Type Format +========== ========= ===== +g BYTE * indicates a byte is to be received. May + be followed by an ASCII number indicating + number of bytes to receive +h unsigned short * indicates a word is to be received +i unsigned long * indicates a dword is to be received +e ENTCOUNT indicates a word is to be received which + indicates the number of entries returned + + + + +Leach, Naik [Page 5] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +4.2.3 Data Descriptors + + +Descriptor Data Type Format +========== ========= ===== +W unsigned short indicates data type of 16 bit integer + (word). Descriptor char may be followed by + an ASCII number indicating the number of + 16 bit words present +D unsigned long indicates data type of 32 bit integer + (dword). Descriptor char may be followed + by an ASCII number indicating the number + of 32 bit words present +B BYTE indicates item of data type 8 bit byte + (octet). The indicated number of bytes are + present in the data. Descriptor char may + be followed by an ASCII number indicating + the number of 8 bit bytes present +O NULL indicates a NULL pointer +z char * indicates a 32 bit pointer to a NULL + terminated ASCII string is present in the + response parameter area. The actual string + is in the response data area and the + pointer in the parameter area points to + the string in the data area. The high word + of the pointer should be ignored. The + converter word present in the response + parameter section should be subtracted + from the low 16 bit value to obtain an + offset into the data area indicating where + the data area resides. +N AUXCOUNT indicates number of auxiliary data + structures. The transaction response data + section contains an unsigned 16 bit number + corresponding to this data item. + + +4.3 Transaction Request Parameters section + +The parameters and data being sent and received are described by ASCII +descriptor strings. These descriptor strings are described in section +4.2. + +The parameters section of the Transact SMB request contains the +following (in the order described) +@ The function number: an unsigned short 16 bit integer identifying the + function being remoted +@ The parameter descriptor string: a null terminated ASCII string +@ The data descriptor string: a null terminated ASCII string. +@ The request parameters, as described by the parameter descriptor + string, in the order that the request parameter descriptor characters + appear in the parameter descriptor string +@ An optional auxiliary data descriptor string: a null terminated ASCII + string. It will be present if there is an auxiliary data structure + + +Leach, Naik [Page 6] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + count in the primary data struct (an "N" descriptor in the data + descriptor string). + +RAP requires that the length of the return parameters be less than or +equal to the length of the parameters being sent; this requirement is +made to simply buffer management in implementations. This is reasonable +as the functions were designed to return data in the data section and +use the return parameters for items like data length, handles, etc. If +need be, this restriction can be circumvented by filling in some pad +bytes into the parameters being sent. + +4.4 Transaction Request Data section + +The Data section for the transaction request is present if the parameter +description string contains an "s" (SENDBUF) descriptor. If present, it +contains: +@ A primary data struct, as described by the data descriptor string +@ Zero or more instances of the auxiliary data struct, as described by + the auxiliary data descriptor string. The number of instances is + determined by the value of the an auxiliary data structure count + member of the primary data struct, indicated by the "N" (AUXCOUNT) + descriptor. The auxiliary data is present only if the auxiliary data + descriptor string is non null. +@ Possibly some pad bytes +@ The heap: the data referenced by pointers in the primary and + auxiliary data structs. + +4.5 Transaction Response Parameters section + +The response sent by the server contains a parameter section which +consists of: +@ A 16 bit integer indicating the status or return code. The possible + values for different functions are different. +@ A 16 bit converter word, used adjust pointers to information in the + response data section. Pointers returned within the response buffer + are 32 bit pointers. The high order 16 bit word should be ignored. + The converter word needs to be subtracted from the low order 16 bit + word to arrive at an offset into the response buffer. +@ The response parameters, as described by the parameter descriptor + string, in the order that the response parameter descriptor + characters appear in the parameter descriptor string. + +4.6 Transaction Response Data section + +The Data section for the transaction response is present if the +parameter description string contains an "r" (RCVBUF) descriptor. If +present, it contains: +@ Zero or more entries. The number of entries is determined by the + value of the entry count parameter, indicated by the "e"(ENTCOUNT) + descriptor. Each entry contains: + @ A primary data struct, as described by the data descriptor + string + @ Zero or more instances of the auxiliary data struct, as + described by the auxiliary data descriptor string. The number + + +Leach, Naik [Page 7] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + of instances is determined by the value of the AUXCOUNT + member of the primary data struct (whose descriptor is "N"). + The auxiliary data is present only if the auxiliary data + descriptor string is non null. +@ Possibly some pad bytes +@ The heap: the data referenced by pointers in the primary and + auxiliary data structs. + +5. NetShareEnum + +The NetShareEnum RAP function retrieves information about each shared +resource on a CIFS server. The definition is: + + unsigned short NetShareEnum( + unsigned short sLevel; + RCVBUF pbBuffer; + RCVBUFLEN cbBuffer; + ENTCOUNT pcEntriesRead; + unsigned short *pcTotalAvail; + ); + + where: + + sLevel specifies the level of detail returned and must have the + value of 1. + + pbBuffer points to the buffer to receive the returned data. If the + function is successful, the buffer contains a sequence of + SHARE_INFO_1 structures (defined later). + + cbBuffer specifies the size, in bytes, of the buffer pointed to by + the pbBuffer parameter. + + pcEntriesRead points to a 16 bit variable that receives a count of + the number of shared resources enumerated in the buffer. This + count is valid only if NetShareEnum returns the NERR_Success or + ERROR_MORE_DATA values. + + pcTotalAvail points to a 16-bit variable that receives a count of + the total number of shared resources. This count is valid only if + NetShareEnum returns the NERR_Success or ERROR_MORE_DATA values. + +Transaction Request Parameters section + +The Transaction request parameters section in this instance contains: + +@ The 16 bit function number for NetShareEnum which is 0. +@ The parameter descriptor string which is "WrLeh". +@ The data descriptor string for the (returned) data which is "B13BWz" +@ The actual parameters as described by the parameter descriptor + string. + +The parameters are: +@ A 16 bit integer with a value of 1 (corresponding to the "W" in the + parameter descriptor string. This represents the level of detail the + server is expected to return + + +Leach, Naik [Page 8] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +@ A 16 bit integer that contains the size of the receive buffer. + + +Transaction Request Data section + +There is no data or auxiliary data to send as part of the request. + + +Transaction Response Parameters section + +The transaction response parameters section consists of: +@ A 16 bit word indicating the return status. The possible values are: + +Code Value Description +NERR_Success 0 No errors encountered +ERROR_ACCESS_DENIED 5 User has insufficient privilege +ERROR_NETWORK_ACCESS_DENIED 65 Network access is denied +ERROR_MORE_DATA 234 Additional data is available +NERR_ServerNotStarted 2114 The server service on the remote + computer is not running +NERR_BadTransactConfig 2141 The server is not configured for + transactions, IPC$ is not shared + +@ A 16 bit "converter" word. +@ A 16 bit number representing the number of entries returned. +@ A 16 bit number representing the total number of available entries. + If the supplied buffer is large enough, this will equal the number of + entries returned. + +Transaction Response Data section + +The return data section consists of a number of SHARE_INFO_1 structures. +The number of such structures present is determined by the third entry +(described above) in the return parameters section. + + +The SHARE_INFO_1 structure is defined as: + + struct SHARE_INFO_1 { + char shi1_netname[13] + char shi1_pad; + unsigned short shi1_type + char *shi1_remark; + } + +where: + + shi1_netname contains a null terminated ASCII string that + specifies the share name of the resource. + + shi1_pad aligns the next data strructure element to a word + boundary. + + shi1_type contains an integer that specifies the type of the + shared resource. The possible values are: + + + +Leach, Naik [Page 9] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + + +Name Value Description +STYPE_DISKTREE 0 Disk Directory Tree +STYPE_PRINTQ 1 Printer Queue +STYPE_DEVICE 2 Communications device +STYPE_IPC 3 Inter process communication (IPC) + + shi1_remark points to a null terminated ASCII string that contains + a comment abthe shared resource. The value for shi1_remark is null + for ADMIN$ and IPC$ share names. The shi1_remark pointer is a 32 + bit pointer. The higher 16 bits need to be ignored. The converter + word returned in the parameters section needs to be subtracted + from the lower 16 bits to calculate an offset into the return + buffer where this ASCII string resides. + + In case there are multiple SHARE_INFO_1 data structures to return, + the server may put all these fixed length structures in the return + buffer, leave some space and then put all the variable length data + (the actual value of the shi1_remark strings) at the end of the + buffer. + +There is no auxiliary data to receive. + + +6. NetServerEnum2 + +The NetServerEnum2 RAP service lists all computers of the specified +type or types that are visible in the specified domains. It may also +enumerate domains. The definition is: + +unsigned short NetServerEnum2 ( + unsigned short sLevel, + RCVBUF pbBuffer, + RCVBUFLEN cbBuffer, + ENTCOUNT pcEntriesRead, + unsigned short *pcTotalAvail, + unsigned long fServerType, + char *pszDomain, + ); + + where : + + sLevel specifies the level of detail (0 or 1) requested. + + pbBuffer points to the buffer to receive the returned data. If the + function is successful, the buffer contains a sequence of + server_info_x structures, where x is 0 or 1, depending on the + level of detail requested. + + cbBuffer specifies the size, in bytes, of the buffer pointed to by + the pbBuffer parameter. + + pcEntriesRead points to a 16 bit variable that receives a count of + the number of servers enumerated in the buffer. This count is + + + +Leach, Naik [Page 10] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + valid only if NetServerEnum2 returns the NERR_Success or + ERROR_MORE_DATA values. + + pcTotal Avail points to a 16 bit variable that receives a count of + the total number of available entries. This count is valid only if + NetServerEnum2 returns the NERR_Success or ERROR_MORE_DATA values. + + fServerType specifies the type or types of computers to enumerate. + Computers that match at least one of the specified types are + returned in the buffer. Possible values are defined in the request + parameters section. + + pszDomain points to a null-terminated string that contains the + name of the workgroup in which to enumerate computers of the + specified type or types. If the pszDomain parameter is a null + string or a null pointer, servers are enumerated for the current + domain of the computer. + +Transaction Request Parameters section + +The Transaction request parameters section in this instance contains: + +@ The 16 bit function number for NetServerEnum2 which is 104. +@ The parameter descriptor string which is "WrLehDz". +@ The data descriptor string for the (returned) data which is "B16" for + level detail 0 or "B16BBDz" for level detail 1. +@ The actual parameters as described by the parameter descriptor + string. + +The parameters are: +@ A 16 bit integer with a value of 0 or 1 (corresponding to the "W" in + the parameter descriptor string. This represents the level of detail + the server is expected to return +@ A 16 bit integer that contains the size of the receive buffer. +@ A 32 bit integer that represents the type of servers the function + should enumerate. The possible values may be any of the following or + a combination of the following: + + +SV_TYPE_WORKSTATION 0x00000001 All workstations +SV_TYPE_SERVER 0x00000002 All servers +SV_TYPE_SQLSERVER 0x00000004 Any server running with SQL + server +SV_TYPE_DOMAIN_CTRL 0x00000008 Primary domain controller +SV_TYPE_DOMAIN_BAKCTRL 0x00000010 Backup domain controller +SV_TYPE_TIME_SOURCE 0x00000020 Server running the timesource + service +SV_TYPE_AFP 0x00000040 Apple File Protocol servers +SV_TYPE_NOVELL 0x00000080 Novell servers +SV_TYPE_DOMAIN_MEMBER 0x00000100 Domain Member +SV_TYPE_PRINTQ_SERVER 0x00000200 Server sharing print queue +SV_TYPE_DIALIN_SERVER 0x00000400 Server running dialin service. +SV_TYPE_XENIX_SERVER 0x00000800 Xenix server +SV_TYPE_NT 0x00001000 NT server +SV_TYPE_WFW 0x00002000 Server running Windows for + + + +Leach, Naik [Page 11] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + Workgroups +SV_TYPE_SERVER_NT 0x00008000 Windows NT non DC server +SV_TYPE_POTENTIAL_BROWSER 0x00010000 Server that can run the browser + service +SV_TYPE_BACKUP_BROWSER 0x00020000 Backup browser server +SV_TYPE_MASTER_BROWSER 0x00040000 Master browser server +SV_TYPE_DOMAIN_MASTER 0x00080000 Domain Master Browser server +SV_TYPE_LOCAL_LIST_ONLY 0x40000000 Enumerate only entries marked + "local" +SV_TYPE_DOMAIN_ENUM 0x80000000 Enumerate Domains. The pszServer + and pszDomain parameters must be + NULL. + +@ A null terminated ASCII string representing the pszDomain parameter + described above + +Transaction Request Data section + +There is no data or auxiliary data to send as part of the request. + +Transaction Response Parameters section + +The transaction response parameters section consists of: +@ A 16 bit word indicating the return status. The possible values are: + +Code Value Description +NERR_Success 0 No errors encountered +ERROR_MORE_DATA 234 Additional data is available +NERR_ServerNotStarted 2114 The RAP service on the remote + computer is not running +NERR_BadTransactConfig 2141 The server is not configured for + transactions, IPC$ is not shared + +@ A 16 bit "converter" word. +@ A 16 bit number representing the number of entries returned. +@ A 16 bit number representing the total number of available entries. + If the supplied buffer is large enough, this will equal the number of + entries returned. + +Transaction Response Data section + +The return data section consists of a number of SHARE_INFO_1 structures. +The number of such structures present is determined by the third entry +(described above) in the return parameters section. + +At level detail 0, the Transaction response data section contains a +number of SERVER_INFO_0 data structure. The number of such structures is +equal to the 16 bit number returned by the server in the third parameter +in the Transaction response parameter section. The SERVER_INFO_0 data +structure is defined as: + + + struct SERVER_INFO_0 { + char sv0_name[16]; + }; + + +Leach, Naik [Page 12] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + + where: + + sv0_name is a null-terminated string that specifies the name of a + computer or domain . + +At level detail 1, the Transaction response data section contains a +number of SERVER_INFO_1 data structure. The number of such structures is +equal to the 16 bit number returned by the server in the third parameter +in the Transaction response parameter section. The SERVER_INFO_1 data +structure is defined as: + + + struct SERVER_INFO_1 { + char sv1_name[16]; + char sv1_version_major; + char sv1_version_minor; + unsigned long sv1_type; + char *sv1_comment_or_master_browser; + }; + + sv1_name contains a null-terminated string that specifies the name + of a computer. + + sv1_version_major specifies the major release version number of + the networking software the server is running. This is entirely + informational and something the caller of the NetServerEnum2 + function gets to see. + + sv1_version_minor specifies the minor release version number of + the networking software the server is running. This is entirely + informational and something the caller of the NetServerEnum2 + function gets to see. + + sv1_type specifies the type of software the computer is running. + The member can be one or a combination of the values defined above + in the Transaction request parameters section for fServerType. + + sv1_comment_or_master_browser points to a null-terminated string. If + the sv1_type indicates that the entry is for a domain, this + specifies the name of the domain master browser; otherwise, it + specifies a comment describing the server. The comment can be a null + string or the pointer may be a null pointer. + + In case there are multiple SERVER_INFO_1 data structures to + return, the server may put all these fixed length structures in + the return buffer, leave some space and then put all the variable + length data (the actual value of the sv1_comment strings) at the + end of the buffer. + +There is no auxiliary data to receive. + +7. NetServerGetInfo + + + + + +Leach, Naik [Page 13] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +The NetServerGetInfo function returns information about the specified +server. The definition is: + + unsigned short NetServerGetInfo( + unsigned short sLevel; + RCVBUF pbBuffer; + + RCVBUFLEN cbBuffer; + unsigned short *pcbTotalAvail; + ); + + where: + + sLevel specifies the level of detail returned. (Legal values are + 0 and 1) + + pbBuffer points to the buffer to receive the returned data. + + cbBuffer specifies the size, in bytes, of the buffer pointed to by + the pbBuffer parameter. + + pcbTotalAvail points to a 16 bit variable that receives a count of + the total number of bytes of information available. This count is + valid only if NetServerGetInfo returns the + NERR_Success or ERROR_MORE_DATA values. + + The return value is one of the following: + +Transaction Request Parameters section + +The Transaction request parameters section in this instance contains: + +@ The 16 bit function number for NetServerGetInfo which is 13. +@ The parameter descriptor string which is "WrLh" +@ The data descriptor string for the (returned) data which is "B16" for + level detail 0 or "B16BBDz" for level detail 1. +@ The actual parameters as described by the parameter descriptor + string. + +The parameters are: +@ A 16 bit integer with a value of 0 or 1 (corresponding to the "W" in + the parameter descriptor string. This represents the level of detail + the server is expected to return +@ A 16 bit integer that contains the size of the receive buffer. + +Transaction Request Data section + +There is no data or auxiliary data to send as part of the request. + +Transaction Response Parameters section + +The transaction response parameters section consists of: +@ A 16 bit word indicating the return status. The possible values are: +Code Value Description +NERR_Success 0 No errors encountered + + + +Leach, Naik [Page 14] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +ERROR_MORE_DATA 234 Additional data is available +NERR_ServerNotStarted 2114 The RAP service on the remote + computer is not running +NERR_BadTransactConfig 2141 The server is not configured for + transactions, IPC$ is not shared + +@ A 16 bit "converter" word. +@ A 16 bit number representing the total number of available bytes. + This has meaning only if the return status is NERR_Success or + ERROR_MORE_DATA. In case of success, this will indicate the number of + useful bytes available. In case of failure, this indicates the + required size of the receive buffer. + +Transaction Response Data section + +At level detail 0, the Transaction response data section contains a +SERVER_INFO_0 data structure. The SERVER_INFO_0 data structure is +defined in section 7.4 + +At level detail 1, the Transaction response data section contains a +SERVER_INFO_1 data structure. The SERVER_INFO_1 data structure is +defined in section 7.4 + +There is no auxiliary data to receive. + +8. NetShareGetInfo + + The NetShareGetInfo function retrieves information about a particular + shared resource on a CIFS server. The definition is: + + unsigned short NetShareGetInfo( + char *pszNetName; + unsigned short sLevel; + RCVBUF pbBuffer; + RCVBUFLEN cbBuffer; + unsigned short *pcbTotalAvail; + ); + + where: + + pszNetName points to an ASCII null-terminated string specifying + the name of the shared resource for which information should be + retrieved. + + sLevel specifies the level of detail returned. (Legal values are + 0, 1 and 2) + + pbBuffer points to the buffer to receive the returned data. + + cbBuffer specifies the size, in bytes, of the buffer pointed to by + the pbBuffer parameter. + + pcbTotalAvail points to a 16 bit variable that receives a count of + the total number of bytes of information available. This count is + + + + +Leach, Naik [Page 15] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + valid only if NetShareGetInfo returns the NERR_Success or + ERROR_MORE_DATA values. + +Transaction Request Parameters section + +The Transaction request parameters section in this instance contains: + +@ The 16 bit function number for NetServerGetInfo which is 1. +@ The parameter descriptor string which is "zWrLh" +@ The data descriptor string for the (returned) data which is "B13" for + level detail 0 or "B13BWz" for level detail 1 or "B13BWzWWWzB9B" + for level detail 2. +@ The actual parameters as described by the parameter descriptor + string. + +The parameters are: +@ A null terminated ASCII string indicating the share for which + information should be retrieved. +@ A 16 bit integer with a value of 0, 1 or 2 (corresponding to the "W" + in the parameter descriptor string. This represents the level of + detail the server is expected to return +@ A 16 bit integer that contains the size of the receive buffer. + +Transaction Request Data section + +There is no data or auxiliary data to send as part of the request. + +Transaction Response Parameters section + +The transaction response parameters section consists of: +@ A 16 bit word indicating the return status. The possible values are: +Code Value Description +NERR_Success 0 No errors encountered +ERROR_MORE_DATA 234 Additional data is available +NERR_ServerNotStarted 2114 The RAP service on the remote + computer is not running +NERR_BadTransactConfig 2141 The server is not configured for + transactions, IPC$ is not shared + +@ A 16 bit "converter" word. +@ A 16 bit number representing the total number of available bytes. + This has meaning only if the return status is NERR_Success or + ERROR_MORE_DATA. Upon success, this number indicates the number of + useful bytes available. Upon failure, this indicates how big the + receive buffer needs to be. + +Transaction Response Data section + +At level detail 0, the Transaction response data section contains a +SHARE_INFO_0 data structure, which is defined as: + + + struct SHARE_INFO_0 { + char shi1_netname[13] + } + + + +Leach, Naik [Page 16] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + + +where: + + shi0_netname contains an ASCIIZ string that specifies the share + name of the resource. + +At level detail 1, the Transaction response data section contains a +SHARE_INFO_1 data structure, which is defined as: + + + struct SHARE_INFO_1 { + char shi1_netname[13] + char shi1_pad; + unsigned short shi1_type + char *shi1_remark; + } + + +where + + shi1_netname contains an ASCIIZ string that specifies the share + name of the resource. + + shi1_pad aligns the next data structure element to a word + boundary. + + shi1_type contains an integer that specifies the type of the + shared resource. The possible values are: + +Name Value Description +STYPE_DISKTREE 0 Disk Directory Tree +STYPE_PRINTQ 1 Printer Queue +STYPE_DEVICE 2 Communications device +STYPE_IPC 3 Inter process communication (IPC) + + + shi1_remark points to a null-terminated string that specifies a + comment describing the share. The comment can be a null string or + the pointer may be a null pointer. + The shi1_remark pointer is a 32 bit pointer. The higher 16 bits + must be ignored. The converter word returned in the parameters + section needs to be subtracted from the lower 16 bits to calculate + an offset into the return buffer where this ASCII string resides. + +At level detail 2, the Transaction response data section contains a +SHARE_INFO_2 data structure, which is defined as: + + + struct SHARE_INFO_2 { + char shi2_netname[13] + char shi2_pad; + unsigned short shi2_type + char * shi2_remark; + unsigned short shi2_permissions; + unsigned short shi2_max_uses; + unsigned short shi2_current_uses; + unsigned short shi2_path; + unsigned short shi2_passwd[9] + + + +Leach, Naik [Page 17] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + + unsigned short shi2_pad2; + } + +where + + shi2_netname contains a null terminated ASCII string that + specifies the share name of the resource. + + shi2_pad aligns the next data strructure element to a word + boundary. + + shi2_type contains an integer that specifies the type of the + shared resource. The possible values are: + + +Name Value Description +STYPE_DISKTREE 0 Disk Directory Tree +STYPE_PRINTQ 1 Printer Queue +STYPE_DEVICE 2 Communications device +STYPE_IPC 3 Inter process + communication (IPC) + + + shi2_remark is a pointer to a null terminated ASCII string + specifying a comment for the share + + shi2_permissions specifies the permissions on the shared resource + if the CIFS server is operating with share level security. The + values are this element can take are defined as a series of bit + masks that may be OR’ed with each other. The bit mask values are: + + +Name Bit Mask Value Description +ACCESS_READ 0x01 Permission to read & execute from resource +ACCESS_WRITE 0x02 Permission to write data to resource +ACCESS_CREATE 0x04 Permission to create an instance of the + resource +ACCESS_EXEC 0x08 Permission to execute from resource +ACCESS_DELETE 0x10 Permission to delete the resource +ACCESS_ATRIB 0x20 Permission to modify the resource + attributes such as date & time of last + modification, etc +ACCESS_PERM 0x40 Permission to change permissions on the + resource +ACCESS_ALL 0x7F All of the above permissions + + shi2_max_uses specifies the maximum number of current uses the + shared resource can accommodate. A Value of -1 indicates there is + no limit. + + shi2_current_uses specifies the current number of connections to + the resource + + shi2_path point to an ASCIIZ string that contains the local (on + the remote CIFS server) path name of the shared resource. + + + + +Leach, Naik [Page 18] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + @ For printer resources, shi2_path specifies the name of the + printer queue being shared + @ For disk devices, shi2_path specifies the path being shared + @ For communication device queues, shi2_path specifies the name of + the of the communication device + @ For ADMIN$ or IPC$ resources, shi2_path must be a null pointer + + shi2_passwd specifies the password for the resource in case the + CIFS server is running with share level security. For CIFS servers + running with user level security, this field is set to null and is + ignored. + + shi2_pad2 is just a pad byte + + All of the pointers to an ASCII string in this data structure + (shi2_remark and shi2_path) need to be treated specially. The + pointer is a 32 bit pointer. The higher 16 bits need to be + ignored. The converter word returned in the parameters section + needs to be subtracted from the lower 16 bits to calculate an + offset into the return buffer where this ASCII string resides. + + +There is no auxiliary data in the response. + +9. NetwkstaUserLogon + +This is a function executed on a remote CIFS server to log on a user. +The purpose is to perform checks such as whether the specified user is +permitted to logon from the specified computer, whether the specified +user is permitted to log on at the given moment, etc. as well as perform +housekeeping and statistics updates. + +There is a password field in the parameters for this function. However, +this field is always set to null before the function is sent on the +wire, in order to preserve security. The remote CIFS server ignores this +meaningless password that is sent. The remote CIFS server ensures +security by checking that the user name and computer name that are in +the request parameters are the same used to establish the session and +connection to the IPC$ share on the remote CIFS server. + +The definition is: + + unsigned short NetWkstaUserLogon( + char *reserved1; + char *reserved2; + unsigned short sLevel; + BYTE bReqBuffer[54]; + unsigned short cbReqBuffer; + RCVBUF pbBuffer; + RCVBUFLEN cbBuffer; + unsigned short *pcbTotalAvail; + ); + + where: + + + + +Leach, Naik [Page 19] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + reserved1 and reserved2 are reserved fields and must be null. + + sLevel specifies the level of detail returned. The only legal + value is 1. + + pbReqBuffer points to the request buffer. This buffer contains + parameters that need to be sent to the server. The actual value + and structure is defined in the Transaction Request Parameters + section. + + cbReqBuffer specifies the size, in bytes, of the buffer pointed to + by the pbReqBuffer parameter. The value must be decimal 54. + + pbBuffer points to the buffer to receive the returned data. + + cbBuffer specifies the size, in bytes, of the buffer pointed to by + the pbBuffer parameter. + + pcbTotalAvail is a pointer to an unsigned short which gets filled + with the total number of data bytes available if the function + succeeds. + +Transaction Request Parameters section + +The Transaction request parameters section in this instance contains: + +@ The 16 bit function number for NetWkstaUserLogon which is 132. +@ The parameter descriptor string which is "OOWb54WrLh" +@ The data descriptor string for the (returned) data which is + "WB21BWDWWDDDDDDDzzzD" +@ The actual parameters as described by the parameter descriptor + string. + +The parameters are: +@ A 16 bit integer with a value of 1 (corresponding to the "W" in the + parameter descriptor string. This represents the level of detail the + server is expected to return) +@ a byte array of length 54 bytes. These 54 bytes are defined as + + char wlreq1_name[21]; // User Name + char wlreq1_pad1; //Pad next field to a word boundary + char wlreq1_password[15]; //Password, set to null, ignored by + server + char wlreq1_pad2; //Pad next field to word boundary + char wlreq1_workstation[16]; //ASCII name of computer +@ A 16 bit integer with a value of 54 +@ A 16 bit integer that contains the size of the receive buffer + + +Transaction Request Data section + +There is no data or auxiliary data to send as part of the request. + +Transaction Response Parameters section + + + + +Leach, Naik [Page 20] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +The transaction response parameters section consists of: +@ A 16 bit word indicating the return status. The possible values are: + +Code Valu Description + e +NERR_Success 0 No errors encountered +ERROR_ACCESS_DENIED 5 User has insufficient privilege +NERR_LogonScriptError 2212 An error occurred while loading or + running the logon script +NERR_StandaloneLogon 2214 The logon was not validated by any + server +NERR_NonValidatedLogon 2217 The logon server is running an + older software version and cannot + validate the logon +NERR_InvalidWorkstation 2240 The user is not allowed to logon + from this computer +NERR_InvalidLogonHours 2241 The user is not allowed to logon at + this time +NERR_PasswordExpired 2242 The user password has expired + +@ A 16 bit "converter" word. +@ A 16 bit number representing the total number of available bytes. + This has meaning only if the return status is NERR_Success or + ERROR_MORE_DATA. Upon success, this number indicates the number of + useful bytes available. Upon failure, this indicates how big the + receive buffer needs to be. + +Transaction Response Data section + +The Transaction response data section contains a data structure +user_logon_info_1 which is defined as: + + + struct user_logon_info_1 { + unsigned short usrlog1_code; + char usrlog1_eff_name[21]; + char usrlog1_pad_1; + unsigned short usrlog1_priv; + unsigned long usrlog1_auth_flags; + unsigned short usrlog1_num_logons; + unsigned short usrlog1_bad_pw_count; + unsigned long usrlog1_last_logon; + unsigned long usrlog1_last_logoff; + unsigned long usrlog1_logoff_time; + unsigned long usrlog1_kickoff_time; + long usrlog1_password_age; + unsigned long usrlog1_pw_can_change; + unsigned long usrlog1_pw_must_change; + char *usrlog1_computer; + char *usrlog1_domain; + char *usrlog1_script_path; + unsigned long usrlog1_reserved1; + }; + +where: + + +Leach, Naik [Page 21] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + + usrlog1_code specifies the result and can have the following values: + +Code Valu Description + e +NERR_Success 0 No errors encountered +ERROR_ACCESS_DENIED 5 User has insufficient privilege +NERR_LogonScriptError 2212 An error occurred while loading or + running the logon script +NERR_StandaloneLogon 2214 The logon was not validated by any + server +NERR_NonValidatedLogon 2217 The logon server is running an + older software version and cannot + validate the logon +NERR_InvalidWorkstation 2240 The user is not allowed to logon + from this computer +NERR_InvalidLogonHours 2241 The user is not allowed to logon at + this time +NERR_PasswordExpired 2242 Administrator privilege + + + usrlog1_eff_name specifies the account to which the user was logged on + + usrlog1_pad1 aligns the next data structure element to a word boundary + + usrlog1_priv specifies the user’s privilege level. The possible values + are: + +Name Value Description +USER_PRIV_GUEST 0 Guest privilege +USER_PRIV_USER 1 User privilege +USER_PRV_ADMIN 2 Administrator privilege + + usrlog1_auth_flags specifies the account operator privileges. The + possible values are: + +Name Value Description +AF_OP_PRINT 0 Print operator +AF_OP_COMM 1 Communications operator +AF_OP_SERVER 2 Server operator +AF_OP_ACCOUNTS 3 Accounts operator + + usrlog1_num_logons specifies the number of times this user has logged + on. A value of -1 means the number of logons is unknown. + + usrlog1_bad_pw_count specifies the number of incorrect passwords + entered since the last successful logon. + + usrlog1_last_logon specifies the time when the user last logged on. + This value is stored as the number of seconds elapsed since + 00:00:00, January 1, 1970. + + usrlog1_last_logoff specifies the time when the user last logged off. + This value is stored as the number of seconds elapsed since + + +Leach, Naik [Page 22] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + 00:00:00, January 1, 1970. A value of 0 means the last logoff + time is unknown. + + usrlog1_logoff_time specifies the time when the user should logoff. + This value is stored as the number of seconds elapsed since + 00:00:00, Jan 1, 1970. A value of -1 means the user never has to + logoff. + + usrlog1_kickoff_time specifies the time when the user will be logged + off by the system. This value is stored as the number of seconds + elapsed since 00:00:00, Jan 1, 1970. A value of -1 means the + system will never logoff the user. + + usrlog1_password_age specifies the time in seconds since the user + last changed his/her password. + + usrlog1_password_can_change specifies the time when the user can + change the password. This value is stored as the number of + seconds elapsed since 00:00:00, Jan 1, 1970. A value of -1 means + the user can never change the password. + + usrlog1_password_must_change specifies the time when the user must + change the password. This value is stored as the number of + seconds elapsed since 00:00:00, Jan 1, 1970. + + usrlog1_computer specifies the computer where the user is logged on. + + usrlog1_script_path specifies the relative path to the user logon + script. + + usrlog1_reserved is reserved with an undefined value. + +The following table defines the valid fields in the user_logon_info_1 +structure based upon the return values:: + +function return code usrlog1_code element Valid elements of + logoff_info_1 +NERR_Success NERR_Success All +NERR_Success NERR_StandaloneLogon None except usrlog1_code +ERROR_ACCESS_DENIED NERR_PasswordExpired None except usrlog1_code +ERROR_ACCESS_DENIED NERR_InvalidWorkstation None except usrlog1_code +ERROR_ACCESS_DENIED NERR_InvalidLogonhours None except usrlog1_code +ERROR_ACCESS_DENIED NERR_LogonScriptError None except usrlog1_code +ERROR_ACCESS_DENIED ERROR_ACCESS_DENIED None except usrlog1_code +All other errors None; the code is None + meaningless + +All of the pointers in this data structure need to be treated +specially. The pointer is a 32 bit pointer. The higher 16 bits need +to be ignored. The converter word returned in the parameters section +needs to be subtracted from the lower 16 bits to calculate an offset +into the return buffer where this ASCII string resides. + +There is no auxiliary data in the response. + + +Leach, Naik [Page 23] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +10. NetwkstaUserLogoff + +This is a function executed on a remote CIFS server to log on a user. +The purpose is to perform some checks and accomplish housekeeping and +statistics updates. + +The definition is: + + unsigned short NetWkstaUserLogoff( + char *reserved1; + char *reserved2; + unsigned short sLevel; + BYTE bReqBuffer[54]; + unsigned short cbReqBuffer; + REQBUF pbBuffer; + REQBUFLEN cbBuffer; + unsigned short *pcbTotalAvail; + ); + + where: + + reserved1 and reserved2 are reserved fields and must be null. + + sLevel specifies the level of detail returned. The only legal + value is 1. + + pbReqBuffer points to the request buffer. This buffer contains + parameters that need to be sent to the server. The actual value + and structure is defined in the Transaction Request Parameters + section. + + cbReqBuffer specifies the size, in bytes, of the buffer pointed to + by the pbReqBuffer parameter. The value must be decimal 54. + + pbBuffer points to the buffer to receive the returned data. + + cbBuffer specifies the size, in bytes, of the buffer pointed to by + the pbBuffer parameter. + + pcbTotalAvail is a pointer to an unsigned short which gets filled + with the total number of data bytes available if the function + succeeds. + +Transaction Request Parameters section + +The Transaction request parameters section in this instance contains: + +@ The 16 bit function number for NetWkstaUserLogoff which is 133. +@ The parameter descriptor string which is "zzWb38WrLh" +@ The data descriptor string for the (returned) data which is "WDW" +@ The actual parameters as described by the parameter descriptor + string. + +The parameters are: +@ A null pointer + + + +Leach, Naik [Page 24] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +@ Another null pointer +@ A 16 bit integer with a value of 1 (corresponding to the "W" in the + parameter descriptor string. This represents the level of detail the + server is expected to return) +@ An array of length 38 bytes. These 38 bytes are defined as + + char wlreq1_name[21]; // User Name + char wlreq1_pad1; //Pad next field to a word + boundary + char wlreq1_workstation[16]; //ASCII name of computer +@ A 16 bit integer with a value of decimal 38. +@ A 16 bit integer that contains the size of the receive buffer + +Transaction Request Data section + +There is no data or auxiliary data to send as part of the request. + +Transaction Response Parameters section + +The transaction response parameters section consists of: +@ A 16 bit word indicating the return status. The possible values are: + +Code Value Description +NERR_Success 0 No errors encountered +NERR_StandaloneLogon 2214 The logon was not validated by any + server +NERR_NonValidatedLogon 2217 The logon server is running an older + software version and cannot validate the + logoff + +@ A 16 bit "converter" word. +@ A 16 bit number representing the total number of available bytes. + This has meaning only if the return status is NERR_Success or + ERROR_MORE_DATA. Upon success, this number indicates the number of + useful bytes available. Upon failure, this indicates how big the + receive buffer needs to be. + +Transaction Response Data section + +The Transaction response data section contains a data structure +user_logoff_info_1 which is defined as: + + + struct user_logoff_info_1 { + unsigned short usrlogf1_code; + unsigned long usrlogf1_duration; + unsigned short usrlogf1_num_logons; + }; + +where: + + usrlogf1_code specifies the result and can have the following values: + +Code Value Description +NERR_Success 0 No errors encountered +ERROR_ACCESS_DENIED 5 User has insufficient privilege + + +Leach, Naik [Page 25] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +NERR_InvalidWorkstation 2240 The user is not allowed to logon from + this computer + + usrlogf1_duration specifies the time in number of seconds for which + the user was logged + + usrlogf1_num_logons specifies the number of times this user has logged + on. A value of -1 indicates the number is unknown. + +The following table defines the valid fields in the logoff_info_1 +structure based upon the return values:: + +function usrlogf11_code Valid elements of logoff_info_1 +return code element +NERR_Success NERR_Success All +NERR_Success NERR_StandaloneLogon None except usrlogf1_code +All other None; the code is None +errors meaningless + +There is no auxiliary data in the response. + + +11. NetUserGetInfo + +This is a function executed on a remote CIFS server to obtain detailed +information about a particular user. + +The definition is: + + unsigned short NetUserGetInfo( + char *pszUser; + unsigned short sLevel; + RCVBUF pBuffer; + RCVBUFLEN cbBuffer; + unsigned short *pcbTotalAvail; + ); + + where: + + pszUser points to a null terminated ASCII string signifying the + name of the user for which information should be retrieved. + + sLevel specifies the level of detail returned. The only legal + value is 11. + + pbBuffer points to the buffer to receive the returned data. + + cbBuffer specifies the size, in bytes, of the buffer pointed to by + the pbBuffer parameter. + + pcbTotalAvail is a pointer to an unsigned short which gets filled + with the total number of data bytes available if the function + succeeds. + +Transaction Request Parameters section + + +Leach, Naik [Page 26] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +The Transaction request parameters section in this instance contains: + +@ The 16 bit function number for NetUserGetInfo which is 56. +@ The parameter descriptor string which is "zWrLh" +@ The data descriptor string for the (returned) data which is + "B21BzzzWDDzzDDWWzWzDWb21W" +@ The actual parameters as described by the parameter descriptor + string. + +The parameters are: +@ A null terminated ASCII string indicating the user for which + information should be retrieved. +@ A 16 bit integer with a value of decimal 11 (corresponding to the "W" + in the parameter descriptor string. This represents the level of + detail the server is expected to return) +@ A 16 bit integer that contains the size of the receive buffer + + +Transaction Request Data section + +There is no data or auxiliary data to send as part of the request. + +Transaction Response Parameters section + +The transaction response parameters section consists of: +@ A 16 bit word indicating the return status. The possible values are: + +Code Valu Description + e +NERR_Success 0 No errors encountered +ERROR_ACCESS_DENIED 5 User has insufficient privilege +ERROR_MORE_DATA 234 additional data is available +NERR_BufTooSmall 2123 The supplied buffer is too small +NERR_UserNotFound 2221 The user name was not found +@ A 16 bit "converter" word. +@ A 16 bit number representing the total number of available bytes. + This has meaning only if the return status is NERR_Success or + ERROR_MORE_DATA. Upon success, this number indicates the number of + useful bytes available. Upon failure, this indicates how big the + receive buffer needs to be. + +Transaction Response Data section + +The Transaction response data section contains a data structure +user_logon_info_1 which is defined as: + + + struct user_info_11 { + char usri11_name[21]; + char usri11_pad; + char *usri11_comment; + char *usri11_usr_comment; + char *usri11_full_name; + unsigned short usri11_priv; + unsigned long usri11_auth_flags; + + + +Leach, Naik [Page 27] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + + long usri11_password_age; + char *usri11_homedir; + char *usri11_parms; + long usri11_last_logon; + long usri11_last_logoff; + unsigned short usri11_bad_pw_count; + unsigned short usri11_num_logons; + char *usri11_logon_server; + unsigned short usri11_country_code; + char *usri11_workstations; + unsigned long usri11_max_storage; + unsigned short usri11_units_per_week; + unsigned char *usri11_logon_hours; + unsigned short usri11_code_page; + }; + +where: + + usri11_name specifies the user name for which information is retireved + + usri11_pad aligns the next data structure element to a word boundary + + usri11_comment is a null terminated ASCII comment + + usri11_user_comment is a null terminated ASCII comment about the user + + usri11_full_name is a null terminated ASCII specifying the full name + of the user + + usri11_priv specifies the level of the privilege assigned to the user. + The possible values are: + +Name Value Description +USER_PRIV_GUEST 0 Guest privilege +USER_PRIV_USER 1 User privilege +USER_PRV_ADMIN 2 Administrator privilege + + usri11_auth_flags specifies the account operator privileges. The + possible values are: + +Name Value Description +AF_OP_PRINT 0 Print operator +AF_OP_COMM 1 Communications operator +AF_OP_SERVER 2 Server operator +AF_OP_ACCOUNTS 3 Accounts operator + + + usri11_password_age specifies how many seconds have elapsed since the + password was last changed. + + usri11_home_dir points to a null terminated ASCII string that contains + the path name of the user's home directory. + + + + +Leach, Naik [Page 28] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + usri11_parms points to a null terminated ASCII string that is set + aside for use by applications. + + usri11_last_logon specifies the time when the user last logged on. + This value is stored as the number of seconds elapsed since + 00:00:00, January 1, 1970. + + usri11_last_logoff specifies the time when the user last logged off. + This value is stored as the number of seconds elapsed since + 00:00:00, January 1, 1970. A value of 0 means the last logoff + time is unknown. + + usri11_bad_pw_count specifies the number of incorrect passwords + entered since the last successful logon. + + usri11_log1_num_logons specifies the number of times this user has + logged on. A value of -1 means the number of logons is unknown. + + usri11_logon_server points to a null terminated ASCII string that + contains the name of the server to which logon requests are sent. + A null string indicates logon requests should be sent to the + domain controller. + + usri11_country_code specifies the country code for the user's language + of choice. + + usri11_workstations points to a null terminated ASCII string that + contains the names of workstations the user may log on from. + There may be up to 8 workstations, with the names separated by + commas. A null strings indicates there are no restrictions. + + usri11_max_storage specifies the maximum amount of disk space the user + can occupy. A value of 0xffffffff indicates there are no + restrictions. + + usri11_units_per_week specifies the equal number of time units into + which a week is divided. This value must be equal to 168. + + usri11_logon_hours points to a 21 byte (168 bits) string that + specifies the time during which the user can log on. Each bit + represents one unique hour in a week. The first bit (bit 0, word + 0) is Sunday, 0:00 to 0:59, the second bit (bit 1, word 0) is + Sunday, 1:00 to 1:59 and so on. A null pointer indicates there + are no restrictions. + + usri11_code_page specifies the code page for the user's language of + choice + +All of the pointers in this data structure need to be treated +specially. The pointer is a 32 bit pointer. The higher 16 bits need +to be ignored. The converter word returned in the parameters section +needs to be subtracted from the lower 16 bits to calculate an offset +into the return buffer where this ASCII string resides. + + + +Leach, Naik [Page 29] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +There is no auxiliary data in the response. + +12. NetWkstaGetInfo + +This is a function executed on a remote CIFS server to obtain detailed +information about a workstation. + +The definition is: + + unsigned short NetWkstaGetInfo( + unsigned short sLevel; + RCVBUF pBuffer; + RCVBUFLEN cbBuffer; + unsigned short *pcbTotalAvail; + ); + + where: + + sLevel specifies the level of detail returned. The only legal + value is 10. + + pbBuffer points to the buffer to receive the returned data. + + cbBuffer specifies the size, in bytes, of the buffer pointed to by + the pbBuffer parameter. + + pcbTotalAvail is a pointer to an unsigned short which gets filled + with the total number of data bytes available if the function + succeeds. + +Transaction Request Parameters section + +The Transaction request parameters section in this instance contains: + +@ The 16 bit function number for NetWkstaGetInfo which is 63. +@ The parameter descriptor string which is "WrLh" +@ The data descriptor string for the (returned) data which is + "zzzBBzz". +@ The actual parameters as described by the parameter descriptor + string. + +The parameters are: +@ A 16 bit integer with a value of decimal 10 (corresponding to the "W" + in the parameter descriptor string. This represents the level of + detail the server is expected to return) +@ A 16 bit integer that contains the size of the receive buffer + + +Transaction Request Data section + +There is no data or auxiliary data to send as part of the request. + +Transaction Response Parameters section + +The transaction response parameters section consists of: + + + +Leach, Naik [Page 30] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +@ A 16 bit word indicating the return status. The possible values are: + +Code Valu Description + e +NERR_Success 0 No errors encountered +ERROR_ACCESS_DENIED 5 User has insufficient privilege +ERROR_MORE_DATA 234 additional data is available +NERR_BufTooSmall 2123 The supplied buffer is too small +NERR_UserNotFound 2221 The user name was not found +@ A 16 bit "converter" word. +@ A 16 bit number representing the total number of available bytes. + This has meaning only if the return status is NERR_Success or + ERROR_MORE_DATA. Upon success, this number indicates the number of + useful bytes available. Upon failure, this indicates how big the + receive buffer needs to be. + +Transaction Response Data section + +The Transaction response data section contains a data structure +user_logon_info_1 which is defined as: + + + struct user_info_11 { + char *wki10_computername; + char *wki10_username; + char *wki10_langroup; + unsigned char wki10_ver_major; + unsigned char wki10_ver_minor; + char *wki10_logon_domain; + char *wki10_oth_domains; + }; + +where: + + wki10_computername is a pointer to a NULL terminated ASCII string that + specifies the name of the workstation. + + wki10_username is a pointer to a NULL terminated ASCII string that + specifies the user who is logged on at the workstation. + + wki10_langroup is a pointer to a NULL terminated ASCII string that + specifies the domain to which the workstation belongs. + + wki10_ver_major specifies the major version number of the networking + software the workstation is running. + + wki10_ver_minor specifies the minor version number of the networking + software the workstation is running. + + wki10_logon domain is a pointer to a NULL terminated ASCII string that + specifies the domain for which a user is logged on. + + wki10_oth domain is a pointer to a NULL terminated ASCII string that + specifies all domains in which the computer is enlisted. + + + +Leach, Naik [Page 31] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +All of the pointers in this data structure need to be treated +specially. The pointer is a 32 bit pointer. The higher 16 bits need +to be ignored. The converter word returned in the parameters section +needs to be subtracted from the lower 16 bits to calculate an offset +into the return buffer where this ASCII string resides. + +There is no auxiliary data in the response. + + +13. SamOemChangePassword + +This is a function executed on a remote CIFS server to change a user’s +password. + +The definition is: + + unsigned short SamOemChangePassword( + uchar *UserName; + uchar *OldPassword; + uchar *NewPassword; + ); + + where: + + UserName is a pointer to a NULL terminated ASCII string + representing the name of the user for which the password should be + changed. + + OldPassword is a pointer to a NULL terminated ASCII string + representing the current password of the user + + NewPassword is a pointer to a NULL terminated ASCII string + representing the new password of the + +Transaction Request Parameters section + +The Transaction request parameters section in this instance contains: + +@ The 16 bit function number for SamOEMChangePassword which is 214. +@ The parameter descriptor string which is "zsT" +@ The actual parameters as described by the parameter descriptor + string. + +The parameters are: +@ A null terminated ASCII string that represents the name of the user + for whom the password is being changed. +@ A word with a value of 532 representing the size of the data buffer. + + +Transaction Request Data section + +The data buffer to be sent consists of 532 bytes of data. The first 516 +bytes represent the new password in an encrypted form. The last 16 bytes +represent the old password in an encrypted form. + + + + +Leach, Naik [Page 32] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +The new password is represented by the structure + + + struct { + char NewPasswordBuffer[512]; + long LengthofNewPasswordInBytes; + } + +The new password is stored in plain text form at the end of the buffer +and the length of the new password is stored in the second member of the +structure. The whole structure is encrypted using RC4. The RC4 key used +is the One Way Transformation (described below) of the old password. + +The RC4 encryption of the One Way Transformation of the old password +constitutes the last 16 bytes of the data buffer. The RC4 key used is +the One Way Transformation of the new password + +There is no auxiliary data to send as part of the request. + + +One Way Transformation + +This section describes the algorithm used by CIFS to apply a one way +transformation on data. + +Let +E(K, D) + denote the DES block mode encryption function [5] , which accepts a + seven byte key (K) and an eight byte data block (D) and produces an + eight byte encrypted data block as its value. + +concat(A, B) + is the result of concatenating A and B + +Ex(K,D) + denote the extension of DES to longer keys and data blocks. If the + data to be encrypted is longer than eight bytes, the encryption + function is applied to each block of eight bytes in sequence and the + results are concatenated together. If the key is longer than seven + bytes, each 8 byte block of data is first completely encrypted using + the first seven bytes of the key, then the second seven bytes, etc., + appending the results each time. For example, to encrypt the 16 byte + quantity D0D1 with the 14 byte key K0K1, + + Ex(K0K1,D0D1) = concat(E(K0,D0),E(K0,D1),E(K1,D0),E(K1,D1)) + +head(S, B) + denote the first B bytes of the byte string S. + +swab(S) + denote the byte string obtained by reversing the order of the bits in + each byte of S, i.e., if S is byte string of length one, with the + value 0x37 then swab(S) is 0xEC. + + + + +Leach, Naik [Page 33] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + + +The One Way Transformation function is defined as: + + + OWF = Ex(swab(P14), N8) + +Where +@ P14 is the data to encrypted. If P14 is the user’s password, it is a + clear, upper-cased text string, padded with blanks +@ N8 is an 8 byte string whose value is available from Microsoft upon + request + + + +Transaction Response Parameters section + +The transaction response parameters section consists of: +@ A 16 bit word indicating the return status. The possible values are: + +Code Valu Description + e +NERR_Success 0 No errors encountered +ERROR_ACCESS_DENIED 5 User has insufficient privilege +ERROR-INVALID-PASSWORD 86 The specified password is invalid +NERR_PasswordCantChange 2243 The password cannot be changed +NERR_PasswordTooShort 2246 The password is too short + +Transaction Response Data section + +There is no Transaction Response Data to receive + +There is no auxiliary data in the response. + + + +14. Author's Addresses + +Paul Leach +Dilip Naik +Microsoft +1 Microsoft Way +Redmond, WA 98052 +paulle@microsoft.com +v-dilipn@microsoft.com + + +15. Appendix A + +Transaction SMBs + +These SMBs are used both to retrieve bulk data from the server (e.g.: +enumerate shares, etc.) and to change the server's state (EG: add a new +share, change file permissions, etc.) Transaction requests are also +unusual because they can have a multiple part request and/or a multiple + + +Leach, Naik [Page 34] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +part response. For this reason, transactions are handled as a set of +sequenced commands to the server. Each part of a request is sent as a +sequenced command using the same Mid value and an increasing Seq value. +The server responds to each request piece except the last one with a +response indicating that the server is ready for the next piece. The +last piece is responded to with the first piece of the result data. The +client then sends a transaction secondary SMB with ParameterDisplacement +set to the number of parameter bytes received so far and +DataDisplacement set to the number of data bytes received so far and +ParameterCount, ParameterOffset, DataCount, and DataOffset set to zero +(0). The server responds with the next piece of the transaction result. +The process is repeated until all of the response information has been +received. When the transaction has been completed, the redirector must +send another sequenced command (an echo SMB will do fine) to the server +to allow the server to know that the final piece was received and that +resources allocated to the transaction command may be released. +The flow is as follows, where (S) is the SequenceNumber, (N) is the +number of request packets to be sent from the client to the server, and +(M) is the number of response packets to be sent by the server to the +client: + + + Client <-> Server + ======================= === =========================== + + SMB(S) Transact -> + <- OK (S) send more data + [ repeat N-1 times: + SMB(S+1) Transact -> + secondary + <- OK (S+1) send more data + SMB(S+N-1) + ] + <- OK (S+N-1) transaction + response (1) + [ repeat M-1 times: + SMB(S+N) Transact -> + secondary + <- OK (S+N) transaction + response (2) + SMB(S+N+M-2) Transact -> + secondary + <- OK (S+N+M-2] transaction + response (M) + ] + SMB(S+N+M-1) Echo -> + <- OK (S+N+M-1) echoed + + +In order to allow the server to detect clients which have been powered +off, have crashed, etc., the client must send commands to the server +periodically if it has resources open on the server. If nothing has +been received from a client for awhile, the server will assume that the +client is no longer running and disconnect the client. This includes +closing any files that the client had open at the time and releasing any +resources being used on behalf of the client. Clients should at least + + + +Leach, Naik [Page 35] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + +send an echo SMB to the server every four (4) minutes if there is +nothing else to send. The server will disconnect clients after a +configurable amount of time which cannot be less than five (5) minutes. +(Note: the NT server has a default timevalue of 15 minutes.) + +15.1.1 TRANSACTIONS + +SMB_COM_TRANSACTION performs a symbolically named transaction. This +transaction is known only by a name (no file handle used). +SMB_COM_TRANSACTION2 likewise performs a transaction, but a word +parameter is used to identify the transaction instead of a name. +SMB_COM_NT_TRANSACTION is used for commands that potentially need to +transfer a large amount of data (greater than 64K bytes). + +15.1.1.1 SMB_COM_TRANSACTION AND SMB_COM_TRANSACTION2 FORMATS + + Primary Client Request Description + =============================== ================================== + + Command SMB_COM_TRANSACTION or + SMB_COM_TRANSACTION2 + + UCHAR WordCount; Count of parameter words; value + = (14 + SetupCount) + USHORT TotalParameterCount; Total parameter bytes being sent + USHORT TotalDataCount; Total data bytes being sent + USHORT MaxParameterCount; Max parameter bytes to return + USHORT MaxDataCount; Max data bytes to return + UCHAR MaxSetupCount; Max setup words to return + UCHAR Reserved; + USHORT Flags; Additional information: + bit 0 - also disconnect TID in + TID + bit 1 - one-way transaction (no + resp) + ULONG Timeout; + USHORT Reserved2; + USHORT ParameterCount; Parameter bytes sent this buffer + USHORT ParameterOffset; Offset (from header start) to + Parameters + USHORT DataCount; Data bytes sent this buffer + USHORT DataOffset; Offset (from header start) to data + UCHAR SetupCount; Count of setup words + UCHAR Reserved3; Reserved (pad above to word) + USHORT Setup[SetupCount]; Setup words (# = SetupWordCount) + USHORT ByteCount; Count of data bytes + STRING Name[]; Name of transaction (NULL if + SMB_COM_TRANSACTION2) + UCHAR Pad[]; Pad to SHORT or LONG + UCHAR Parameters[ParameterCount]; Parameter bytes (# = + ParameterCount) + UCHAR Pad1[]; Pad to SHORT or LONG + UCHAR Data[ DataCount ]; Data bytes (# = DataCount) + + + Interim Server Response Description + + + +Leach, Naik [Page 36] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + + =============================== ================================= + + UCHAR WordCount; Count of parameter words = 0 + USHORT ByteCount; Count of data bytes = 0 + + + Secondary Client Request Description + =============================== ================================== + + Command SMB_COM_TRANSACTION_SECONDARY + + UCHAR WordCount; Count of parameter words = 8 + USHORT TotalParameterCount; Total parameter bytes being sent + USHORT TotalDataCount; Total data bytes being sent + USHORT ParameterCount; Parameter bytes sent this buffer + USHORT ParameterOffset; Offset (from header start) to + Parameters + USHORT ParameterDisplacement; Displacement of these Parameter + bytes + USHORT DataCount; Data bytes sent this buffer + USHORT DataOffset; Offset (from header start) to data + USHORT DataDisplacement; Displacement of these data bytes + USHORT Fid; FID for handle based requests, + else 0xFFFF. This field is + present only if this is an + SMB_COM_TRANSACTION2 request. + USHORT ByteCount; Count of data bytes + UCHAR Pad[]; Pad to SHORT or LONG + UCHAR Parameters[ParameterCount]; Parameter bytes (# = + ParameterCount) + UCHAR Pad1[]; Pad to SHORT or LONG + UCHAR Data[DataCount]; Data bytes (# = DataCount) + + + Server Response Description + =============================== ================================== + + UCHAR WordCount; Count of data bytes; value = 10 + + SETUPCOUNT + USHORT TotalParameterCount; Total parameter bytes being sent + USHORT TotalDataCount; Total data bytes being sent + USHORT Reserved; + USHORT ParameterCount; Parameter bytes sent this buffer + USHORT ParameterOffset; Offset (from header start) to + Parameters + USHORT ParameterDisplacement; Displacement of these Parameter + bytes + USHORT DataCount; Data bytes sent this buffer + USHORT DataOffset; Offset (from header start) to data + USHORT DataDisplacement; Displacement of these data bytes + UCHAR SetupCount; Count of setup words + UCHAR Reserved2; Reserved (pad above to word) + USHORT Setup[SetupWordCount]; Setup words (# = SetupWordCount) + USHORT ByteCount; Count of data bytes + UCHAR Pad[]; Pad to SHORT or LONG + UCHAR Parameters[ParameterCount]; Parameter bytes (# = + ParameterCount) + UCHAR Pad1[]; Pad to SHORT or LONG + + + +Leach, Naik [Page 37] + + +INTERNET-DRAFT CIFS Remote Admin Protocol January 10, 1997 + + + UCHAR Data[DataCount]; Data bytes (# = DataCount) + + + + +16. Appendix B + + +16.1 Marshaling and unmarshaling using descriptor strings + +TBD. This will be a note to explain how the descriptor strings can be +used to drive a marshaling engine that can automatically marshal and +unmarshal RAP messages and call local APIs whose calling sequences +closely match the format of the RAP services. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Leach, Naik [Page 38] \ No newline at end of file -- cgit v1.2.3