#!/bin/sh
# $Id$

# ugly: this variable is set during port install time
ezjail_prefix=EZJAIL_PREFIX
ezjail_admin=`basename -- $0`
ezjail_etc="${ezjail_prefix}/etc"
ezjail_share="${ezjail_prefix}/share/ezjail"
ezjail_examples="${ezjail_prefix}/share/examples/ezjail"
ezjail_jailcfgs="${ezjail_etc}/ezjail"

# read user config
[ -f "${ezjail_etc}/ezjail.conf" ] && . "${ezjail_etc}/ezjail.conf"

# set defaults
: ${ezjail_jaildir="/usr/jails"}
: ${ezjail_jailtemplate="${ezjail_jaildir}/newjail"}
: ${ezjail_jailbase="${ezjail_jaildir}/basejail"}
: ${ezjail_jailfull="${ezjail_jaildir}/fulljail"}
: ${ezjail_jailtemp="${ezjail_jaildir}/ezjailtemp"}
: ${ezjail_flavours_dir="${ezjail_jaildir}/flavours"}
: ${ezjail_portscvsroot="freebsdanoncvs@anoncvs.FreeBSD.org:/home/ncvs"}
: ${ezjail_sourcetree="/usr/src"}
: ${ezjail_uglyperlhack="YES"}
: ${ezjail_default_execute="/usr/bin/login -f root"}

: ${ezjail_mount_enable="YES"}
: ${ezjail_devfs_enable="YES"}
: ${ezjail_devfs_ruleset="devfsrules_jail"}
: ${ezjail_procfs_enable="YES"}
: ${ezjail_fdescfs_enable="YES"}
: ${ezjail_exec_start="/bin/sh /etc/rc"}

: ${ezjail_use_zfs="NO"}
: ${ezjail_jailzfs=""}
: ${ezjail_zfs_properties=""}

ezjail_dirlist="bin boot lib libexec rescue sbin usr/bin usr/games usr/include usr/lib usr/libdata usr/libexec usr/sbin usr/src usr/share"
ezjail_basesystem="base"

# amd64 needs some extra libs
case `uname -p` in amd64) ezjail_dirlist="${ezjail_dirlist} usr/lib32"; ezjail_basesystem="${ezjail_basesystem} lib32";; esac

# Synopsis messages
ezjail_usage_ezjailadmin="${ezjail_admin} v3.0\nUsage: ${ezjail_admin} [archive|config|console|create|delete|install|list|restore|update] {params}"
ezjail_usage_install="Usage: ${ezjail_admin} install [-mMpPsS] [-h host] [-r release]"
ezjail_usage_create="Usage: ${ezjail_admin} create [-xbi] [-f flavour] [-r jailroot] [-s size] [-c bde|eli|zfs] [-C args] [-a archive] jailname jailip"
ezjail_usage_delete="Usage: ${ezjail_admin} delete [-w] jailname"
ezjail_usage_update="Usage: ${ezjail_admin} update [-s sourcetree] [-p] (-b|-i|-u|-P)"
ezjail_usage_config="Usage: ${ezjail_admin} config [-r run|norun] [-n newname] [-c cpuset] [-z zfs-datasets] [-f fib] [-i attach|detach|fsck] jailname"
ezjail_usage_console="Usage: ${ezjail_admin} console [-f] [-e command] jailname"
ezjail_usage_archive="Usage: ${ezjail_admin} archive [-Af] [-a archive] [-d archivedir] jailname [jailname...]"
ezjail_usage_restore="Usage: ${ezjail_admin} restore [-f] [-d archivedir] (archive|jailname)..."
ezjail_usage_list="Usage: ${ezjail_admin} list"

################################
# End of variable initialization
#

# define our bail out shortcut
exerr () { echo -e "$*" >&2 ; exit 1; }

# generic attach routine for image jails
attach_images () {
  # Create a memory disc from jail image
  ezjail_imagedevice=`mdconfig -a -t vnode -f ${ezjail_image}` || exerr "Error: Could not attach memory disc."

  # If this is a crypto jail, try to mount it, remind user, which jail
  # this is. In this case, the device to mount is 
  case ${ezjail_imagetype} in
  crypto|bde)
    echo Attaching bde device for image jail ${ezjail}...
    echo gbde attach "/dev/${ezjail_imagedevice}" ${ezjail_attachparams} | /bin/sh
    [ $? -eq 0 ] || detach_images keep || exerr "Error: Attaching bde device failed."
    # Device to mount is not md anymore
    ezjail_device="${ezjail_imagedevice}.bde"
    ;;
  eli)
    echo "Attaching eli device for image jail ${ezjail}..."
    echo geli attach ${ezjail_attachparams} "/dev/${ezjail_imagedevice}" | /bin/sh
    [ $? -eq 0 ] || detach_images keep || exerr "Error: Attaching eli device failed."
    # Device to mount is not md anymore
    ezjail_device="${ezjail_imagedevice}.eli"
    ;;
  simple)
    ezjail_device=${ezjail_imagedevice}
    ;;
  esac
}

# generic mount routine for image jails
mount_images () {
  rm -f "${ezjail_devicelink}"

  # Attach images by type
  attach_images

  # Clean image
  fsck -t ffs -p "/dev/${ezjail_device}"

  mount "/dev/${ezjail_device}" "${ezjail_rootdir}" || detach_images keep || exerr "Error: Could not mount /dev/${ezjail_device} to ${ezjail_rootdir}."
  # relink image device
  ln -s "/dev/${ezjail_device}" "${ezjail_devicelink}"
}

# generic detach routine for image jails
detach_images () {
  # Avoid ending up inside mount point
  cd /

  # unmount and detach memory disc
  if [ "${ezjail_imagedevice}" ]; then
    umount "${ezjail_rootdir}" > /dev/null 2> /dev/null
    case ${ezjail_imagetype} in
      bde) gbde detach "/dev/${ezjail_imagedevice}" > /dev/null;;
      eli) geli detach "/dev/${ezjail_imagedevice}" > /dev/null;;
    esac
    mdconfig -d -u "${ezjail_imagedevice}" > /dev/null
    [ "$1" = "keep" ] || rm -f "${ezjail_image}"
  fi

  # Remove soft link (which acts as a lock)
  [ -e "/dev/${ezjail_imagedevice}" ] || rm -f "${ezjail_devicelink}"

  # This function is being called in case of error. Keep $? bad
  return 1
}

# Find and execute our rc script
start_stop_jail_by_script () {
  ezjail_action=$1
  [ "${ezjail_action}" = "onestart" ] && ezjail_success_check="-n" || ezjail_success_check="-z"

  # Try to locate and run ezjails rc.d script
  if [ -x "${ezjail_prefix}/etc/rc.d/ezjail" ]; then
    (exec "${ezjail_prefix}/etc/rc.d/ezjail" ${ezjail_action} ${ezjail_name});
  elif [ -x "${ezjail_prefix}/etc/rc.d/ezjail.sh" ]; then
    (exec "${ezjail_prefix}/etc/rc.d/ezjail.sh" ${ezjail_action} ${ezjail_name});
  else
    exerr "Error: Could not find ezjail's rc.d script in ${ezjail_prefix}/etc/rc.d/.\n  You need to ${ezjail_action} ${ezjail_name} by hand."
  fi

  # Check for success of our operation
  fetchjailinfo ${ezjail_name}
  [ ${ezjail_success_check} "${ezjail_id}" ] || exerr "Error: Could not ${ezjail_action} ${ezjail_name}.\n  You need to ${ezjail_action} it by hand."
}

# write everything we know about an ezjail to config
writejailinfo () {
  ezjail_destconf=$1
  ezjail_sourceconf=$2

  (
  if [ "${ezjail_sourceconf}" ]; then
    grep -E ^\# ${ezjail_sourceconf}; echo
  else
    echo -e "# To specify the start up order of your ezjails, use these lines to\n# create a Jail dependency tree. See rcorder(8) for more details."
    echo -e "#\n# PROVIDE: standard_ezjail\n# REQUIRE: \n# BEFORE: \n#\n"
  fi

  echo export jail_${ezjail_safename}_hostname=\"${ezjail_hostname}\"
  echo export jail_${ezjail_safename}_ip=\"${ezjail_ips}\"
  echo export jail_${ezjail_safename}_rootdir=\"${ezjail_rootdir}\"
  echo export jail_${ezjail_safename}_exec_start=\"${ezjail_exec_start}\"
  echo export jail_${ezjail_safename}_exec_stop=\"${ezjail_exec_stop}\"
  echo export jail_${ezjail_safename}_mount_enable=\"${ezjail_mount_enable}\"
  echo export jail_${ezjail_safename}_devfs_enable=\"${ezjail_devfs_enable}\"
  echo export jail_${ezjail_safename}_devfs_ruleset=\"${ezjail_devfs_ruleset}\"
  echo export jail_${ezjail_safename}_procfs_enable=\"${ezjail_procfs_enable}\"
  echo export jail_${ezjail_safename}_fdescfs_enable=\"${ezjail_fdescfs_enable}\"
  echo export jail_${ezjail_safename}_image=\"${ezjail_image}\"
  echo export jail_${ezjail_safename}_imagetype=\"${ezjail_imagetype}\"
  echo export jail_${ezjail_safename}_attachparams=\"${ezjail_attachparams}\"
  echo export jail_${ezjail_safename}_attachblocking=\"${ezjail_attachblocking}\"
  echo export jail_${ezjail_safename}_forceblocking=\"${ezjail_forceblocking}\"
  echo export jail_${ezjail_safename}_zfs_datasets=\"${ezjail_zfs_datasets}\"
  echo export jail_${ezjail_safename}_cpuset=\"${ezjail_cpuset}\"
  echo export jail_${ezjail_safename}_fib=\"${ezjail_fib}\"

  ) > "${ezjail_destconf}"

}

# fetch everything we need to know about an ezjail from config
fetchjailinfo () {
  ezjail_name=$1

  # Clean variables, prevent polution
  unset ezjail_config ezjail_running ezjail_hostname ezjail_rootdir ezjail_image ezjail_imagetype ezjail_imagedevice ezjail_devicelink ezjail_ips ezjail_id ezjail_attached ezjail_device ezjail_device_geom ezjail_exec_start ezjail_exec_stop ezjail_mount_enable ezjail_devfs_enable ezjail_devfs_ruleset ezjail_procfs_enable ezjail_fdescfs_enable

  ezjail_safename=`echo -n "${ezjail_name}" | tr -c '[:alnum:]' _`

  if [ -z "$2" ]; then
    [ -e "${ezjail_jailcfgs}/${ezjail_safename}"       ] && ezjail_config="${ezjail_jailcfgs}/${ezjail_safename}"
    [ -e "${ezjail_jailcfgs}/${ezjail_safename}.norun" ] && ezjail_config="${ezjail_jailcfgs}/${ezjail_safename}.norun"
  else
    ezjail_config=$2
  fi
  [ "${ezjail_config}" ] || return 0

  . "${ezjail_config}"
  eval ezjail_hostname=\"\$jail_${ezjail_safename}_hostname\"
  eval ezjail_ips=\"\$jail_${ezjail_safename}_ip\"
  eval ezjail_rootdir=\"\$jail_${ezjail_safename}_rootdir\"

  eval ezjail_exec_start=\"\$jail_${ezjail_safename}_exec_start\"
  eval ezjail_exec_stop=\"\$jail_${ezjail_safename}_exec_stop\"
  # fix backward compatibility issue
  eval ezjail_exec=\"\$jail_${ezjail_safename}_exec\"
  [ "${ezjail_exec}" -a -z "${ezjail_exec_start}" ] && ezjail_exec_start=${ezjail_exec}

  eval ezjail_mount_enable=\"\$jail_${ezjail_safename}_mount_enable\"
  eval ezjail_devfs_enable=\"\$jail_${ezjail_safename}_devfs_enable\"
  eval ezjail_devfs_ruleset=\"\$jail_${ezjail_safename}_devfs_ruleset\"
  eval ezjail_procfs_enable=\"\$jail_${ezjail_safename}_procfs_enable\"
  eval ezjail_fdescfs_enable=\"\$jail_${ezjail_safename}_fdescfs_enable\"

  eval ezjail_image=\"\$jail_${ezjail_safename}_image\"
  eval ezjail_imagetype=\"\$jail_${ezjail_safename}_imagetype\"
  eval ezjail_attachparams=\"\$jail_${ezjail_safename}_attachparams\"
  eval ezjail_attachblocking=\"\$jail_${ezjail_safename}_attachblocking\"
  eval ezjail_forceblocking=\"\$jail_${ezjail_safename}_forceblocking\"
  eval ezjail_zfs_datasets=\"\$jail_${ezjail_safename}_zfs_datasets\"
  eval ezjail_cpuset=\"\$jail_${ezjail_safename}_cpuset\"
  eval ezjail_fib=\"\$jail_${ezjail_safename}_fib\"

  ezjail_softlink=${ezjail_jaildir}/`basename -- "${ezjail_rootdir}"`
  ezjail_devicelink="${ezjail_rootdir}.device"

  if [ "${ezjail_image}" -a -L "${ezjail_devicelink}" ]; then
    # Fetch destination of soft link
    ezjail_device=`stat -f "%Y" ${ezjail_devicelink}`
    ezjail_device_geom=${ezjail_device#/dev/}

    # Add this device to the list of devices to be unmounted
    case ${ezjail_imagetype} in
      crypto|bde) ezjail_imagedevice=${ezjail_device_geom%.bde} ;;
      eli)        ezjail_imagedevice=${ezjail_device_geom%.eli} ;;
      zfs)        ezjail_imagedevice='' ;;
      *)          ezjail_imagedevice=${ezjail_device_geom} ;;
    esac

    mount -p -v | grep -q -E "^${ezjail_devicelink}[[:space:]]+${ezjail_rootdir}" && ezjail_attached="YES"
    mount -p -v | grep -q -E "^${ezjail_device}[[:space:]]+${ezjail_rootdir}" && ezjail_attached="YES"

    # Stale device link detected. Remove and clean.
    [ -z "${ezjail_attached}" ] && unset ezjail_device && rm -f "${ezjail_devicelink}"
  fi

  [ -f "/var/run/jail_${ezjail_safename}.id" ] && ezjail_id=`cat /var/run/jail_${ezjail_safename}.id` || return
  jls | grep -q -E "^ +${ezjail_id} " || unset ezjail_id
}

# fill the base jail - this function is used by install and update
ezjail_splitworld() {
  # Fill basejail from installed world
  cd "${ezjail_jailfull}" || exerr "Error: Cant access temporary Jail directory."

  # This mkdir is important, since cpio will create intermediate
  # directories with permission 0700 which is bad
  if [ "${ezjail_use_zfs}" = "YES" ]; then
    echo "ZFS: create the basejail"
    echo "/sbin/zfs create -p -o mountpoint=${ezjail_jaildir} ${ezjail_zfs_properties} ${ezjail_jailzfs}"
    /sbin/zfs create -p -o mountpoint=${ezjail_jaildir} ${ezjail_zfs_properties} ${ezjail_jailzfs}
    /sbin/zfs create -p ${ezjail_jailzfs}/basejail
    /sbin/zfs snapshot ${ezjail_jailzfs}/basejail@`date -v -7d +"%C%y%m%d_%H:%M:%S"`
  fi
  mkdir -p "${ezjail_jailbase}/usr"
  for dir in ${ezjail_dirlist}; do
    find ${dir} | cpio -d -p -v "${ezjail_jailbase}" || exerr "Error: Installation of ${dir} failed."
    chflags -R noschg ${dir}; rm -r ${dir}; ln -s /basejail/${dir} ${dir}
  done
  mkdir basejail

  # Try to remove the old template jail
  if [ "${ezjail_use_zfs}" = "YES" ]; then
    echo "ZFS: cleanup old template jail"
    [ -d "${ezjail_jailtemplate}" ] && zfs destroy -R ${ezjail_jailzfs}/newjail && rm -rf "${ezjail_jailtemplate}"
    cd ${ezjail_jaildir}
    zfs rename ${ezjail_jailzfs}/fulljail ${ezjail_jailzfs}/newjail
  else
    [ -d "${ezjail_jailtemplate}" ] && chflags -R noschg "${ezjail_jailtemplate}" && rm -rf "${ezjail_jailtemplate}"
    mv "${ezjail_jailfull}" "${ezjail_jailtemplate}"
  fi

  # If the default flavour example has not yet been copied, do it now
  [ -d "${ezjail_flavours_dir}/example" ] || mkdir -p "${ezjail_flavours_dir}" && cp -p -R "${ezjail_examples}/example" "${ezjail_flavours_dir}"

  # no /usr/ports? link to /basejail/usr/ports
  [ -e "${ezjail_jailtemplate}/usr/ports" ] || ln -s /basejail/usr/ports "${ezjail_jailtemplate}/usr/ports"

  # A ports collection inside jails is hardly useful w/o an appropriate
  # /etc/make.conf.
  if [ -f "${ezjail_examples}/example/etc/make.conf" -a ! -f "${ezjail_jailtemplate}/etc/make.conf" ]; then
    cp -p "${ezjail_examples}/example/etc/make.conf" "${ezjail_jailtemplate}/etc/"
    echo "Note: a non-standard /etc/make.conf was copied to the template jail in order to get the ports collection running inside jails."
  fi

  # The ugly perl hack[tm]. Note: we wont do such things for any given
  # port :(
  [ "${ezjail_uglyperlhack}" -a ! -L "${ezjail_jailbase}/usr/bin/perl" ] && ln -s /usr/local/bin/perl "${ezjail_jailbase}/usr/bin/perl"
}

# The user may want to have a ports tree in basejail
ezjail_updateports () {
  local _portsnap_fetch="fetch"
  # if /usr/ports/CVS exists, assume cvs up is safe
  # this is legacy
  if [ -f "${ezjail_jailbase}/usr/ports/CVS/Root" ]; then
    echo -n "Updating ports from "; cat "${ezjail_jailbase}/usr/ports/CVS/Root"
    echo "Warning: Upgrading legacy ports copy. Consider removing ${ezjail_jailbase}/usr/ports and use the new portsnap strategy instead."
    echo "Gathering local information may take a while."
    cd "${ezjail_jailbase}/usr/ports/" && cvs -d "${ezjail_portscvsroot}" up -Pd
  else
    [ -z "$TERM" -o "$TERM" = "dumb" ] && _portsnap_fetch="cron"
    portsnap ${_portsnap_fetch}
    [ -d "${ezjail_jailbase}/usr/ports" ] && ezjail_portsnapaction="update"
    portsnap -p "${ezjail_jailbase}/usr/ports" ${ezjail_portsnapaction:-"extract"}
  fi
  [ $? -eq 0 ] || exerr "Error: Updating ports failed."
}

# Try to fetch the list of releases the server provides
ezjail_queryftpserver () {
  unset _ret
  echo -n "Querying your ftp-server... "
  TIFS=${IFS}; IFS=
  for ezjail_path in pub/FreeBSD/releases pub/FreeBSD/snapshot pub/FreeBSD releases snapshots NO; do
    if [ ${ezjail_path} = "NO" ]; then
      echo "Warning: I am having problems querying the ftp server you specified (${ezjail_ftphost})."
      _ret=1; break
    fi
    ezjail_ftpresponse=`echo ls | ftp "${ezjail_ftphost}:${ezjail_path}/${ezjail_installarch}/" 2> /dev/null` 2> /dev/null
    if [ $? -eq 0 ]; then
      echo -e "The ftp server you specified (${ezjail_ftphost}) seems to provide the following builds:\n${ezjail_ftpresponse}"
      _ret=0; break 2
    fi
  done
  IFS=${TIFS}
  ezjail_ftpserverqueried="YES"
  return ${_ret}
}

# Make a path absolute, if it isn't already
ezjail_makeabsolute ( ) {
  eval [ \"\${$1%%[!/]*}\" -o \"\${$1}\" = \"-\" ] && return
  [ "${2%%[!/]*}" ] && path=${2} || path=`pwd -P`/${2}
  eval export ${1}="${path}/\${$1}"
}

parse_geli_attach_args () {
  # create geli(8) attach arguments from geli(8) init arguments:
  #    -P becomes -p if present, -K newkeyfile becomes -k newkeyfile if present, 
  #    everything else is dicarded
  #  exit values: 0->NO PASSWORD SET, 1->PASSWORD SET
  _exit=0
  while getopts :bPva:i:K:l:s: arg; do
    case ${arg} in
      b|v|a|i|l|s);; # ignore these
      P) echo -n "-p "; _exit=1 ;;
      K) echo -n "-k '$OPTARG' ";;
      ?) exerr "Error: Processing of attach params failed.";;
    esac
  done
  return ${_exit}
}

parse_gbde_attach_args () {
  # create gbde(8) attach arguments from gbde(8) init arguments:
  #   -L lockfile becomes -l lockfile if present
  #   -K keyfile becomes -k keyfile if present
  #   -P passphrase becomes -p passphrase if present
  #   everything else is discarded
  #  exit values: 0->NO PASSWORD SET, 1->PASSWORD SET
  _exit=0
  while getopts :iK:f:L:P: arg; do
    case ${arg} in
      i|f);; # ignore these
      P) echo -n "-p '$OPTARG' "; _exit=1;;
      K) echo -n "-k '$OPTARG' ";;
      L) echo -n "-l '$OPTARG' ";;
      ?) exerr "Error: Processing of attach params failed.";;
    esac
  done
  return ${_exit}
}

check_for_zfs () {
  # check the ZFS version
  _zfs_version=`sysctl -nq vfs.zfs.version.spa`
  [ -z "${_zfs_version}" -o "${_zfs_version}" -lt 13 ] && exerr "Error: ZFS is not loaded or your ZFS version is not supported."

  # check if ZFS is enabled when managing basejail/newjail in ZFS
  . /etc/rc.subr
  load_rc_config_var zfs zfs_enable
  checkyesno ezjail_use_zfs && ! checkyesno zfs_enable && echo "Warning: You should enable ZFS in /etc/rc.conf"
}

check_for_zpool () {
  # check for the ZFS zpool to be online
  check_for_zfs
  _zpoolstatus=`/sbin/zpool list -H -o health ${ezjail_jailzfs%%/*} 2> /dev/null`
  [ "${_zpoolstatus}" = "DEGRADED" ] && echo "Warning: Your zpool is in a DEGRADED state."
  [ "${_zpoolstatus}" = "ONLINE" -o "${_zpoolstatus}" = "DEGRADED" ] || exerr "Error: Your zpool does not exist or is not online."
}

check_for_zfs_exist () {
  # check if the zfs we want to use already exists or not, return 0 if it does and 1 if not
  _exit=1
  _zfs_status=`/sbin/zfs list -H -o name ${ezjail_jailzfs}/${ezjail_hostname} 2> /dev/null`
  [ "${_zfs_status}" = "${ezjail_jailzfs}/${ezjail_hostname}" ] && _exit=0
  return ${_exit}
}

#############################
# End of function definitions
# "

# check for command
[ $# -gt 0 ] || exerr ${ezjail_usage_ezjailadmin}

case "$1" in
######################## ezjail-admin CREATE ########################
create)
  # Clean variables, prevent polution
  unset ezjail_rootdir ezjail_flavours ezjail_softlink ezjail_image ezjail_imagetype ezjail_imageparams ezjail_imagesize ezjail_device ezjail_devicelink ezjail_config ezjail_attachparams ezjail_exists ezjail_attachblocking ezjail_forceblocking ezjail_sourcedevice ezjail_rootdirempty ezjail_fromarchive ezjail_fromarchive_config
  shift; while getopts :f:r:s:xbic:C:a:A: arg; do case ${arg} in
    x) ezjail_exists="YES";;
    r) ezjail_rootdir=${OPTARG};;
    f) ezjail_flavours=${OPTARG};;
    a) ezjail_fromarchive=${OPTARG};;
    A) ezjail_fromarchive_config=${OPTARG};;
    c) ezjail_imagetype=${OPTARG};;
    C) ezjail_imageparams=${OPTARG};;
    b) ezjail_forceblocking="YES";;
    i) : ${ezjail_imagetype="simple"};;
    s) ezjail_imagesize=${OPTARG};;
    ?) exerr ${ezjail_usage_create};;
  esac; done; shift $(( ${OPTIND} - 1 ))

  ezjail_name=$1; ezjail_ips=$2

  # we need at least a name and an ip for new jail
  [ "${ezjail_name}" -a "${ezjail_ips}" -a $# -eq 2 ] || exerr ${ezjail_usage_create}

  # check for an active ZFS zpool
  [ "${ezjail_imagetype}" = "zfs" ] && check_for_zpool

  # check for sanity of settings concerning the image feature
  if [ "${ezjail_imagetype}" != "zfs" ]; then
    [ -z "${ezjail_imagetype}" -o "${ezjail_exists}" -o "${ezjail_imagesize}" ] || exerr "Error: Image jails need an image size."
  fi

  # check for a sane image type
  case ${ezjail_imagetype} in ""|simple|bde|eli|zfs) ;; *) exerr ${ezjail_usage_create};; esac

  # check for a sane image size and split it up in blocks
  if [ "${ezjail_imagesize}" ]; then
    _val=`echo "${ezjail_imagesize}"|tr GMKBWX gmkbwx|sed -Ees:g:km:g -es:m:kk:g -es:k:"*2b":g -es:b:"*128w":g -es:w:"*4 ":g -e"s:(^|[^0-9])0x:\1\0X:g" -ey:x:"*":|bc`
    [ $? -eq 0 -a ${_val} -gt 0 ] || exerr "Error: The image size you specified is somehow incomprehensible (you specified ${ezjail_imagesize})."
    ezjail_imageblockcount=`echo ${_val} / 1048576 | bc`
    ezjail_imagerestbytes=`echo ${_val} % 1048576 | bc`
  fi

  # check, whether ezjail has been set up correctly. existence of
  # ezjail_jailbase is our indicator
  [ -d "${ezjail_jailbase}" ] || exerr "Error: base jail does not exist.\n  Please run '${ezjail_admin} install' or '${ezjail_admin} update' first."

  # relative paths don't make sense in rc.scripts
  [ "${ezjail_jaildir%%[!/]*}" ] || exerr "Error: Need an absolute path in ezjail_jaildir.\n  It is currently set to: ${ezjail_jaildir}."

  # jail names must not irritate file systems, excluding dots from this list
  # was done intentionally to permit foo.com style directory names, however,
  # the jail name will be foo_com in most scripts

  ezjail_hostname=`echo -n "${ezjail_name}" | tr '/~' '__'`
  ezjail_safename=`echo -n "${ezjail_name}" | tr -c '[:alnum:]' _`
  : ${ezjail_rootdir="${ezjail_jaildir}/${ezjail_hostname}"}
  ezjail_config="${ezjail_jailcfgs}/${ezjail_safename}"

  # This scenario really will only lead to real troubles in the 'fulljail'
  # case, but I should still explain this to the user and not claim that
  # "an ezjail would already exist"
  case ${ezjail_hostname} in basejail|newjail|fulljail|flavours|ezjailtemp) exerr "Error: Cannot name the jail ${ezjail_hostname}.\n  ezjail needs the ${ezjail_hostname} directory for its own administrative purposes.\n  Please rename the ezjail.";; esac

  # jail names may lead to identical configs, eg. foo.bar.com == foo-bar.com
  # so check, whether we might be running into problems
  [ -e "${ezjail_config}" -o -e "${ezjail_config}.norun" ] && exerr "Error: An ezjail config already exists at ${ezjail_config}.\n  This can happen because ezjail converts non alphanumeric characters in jail names to '_'.\n  Please rename the ezjail."

  # if jail root specified on command line is not absolute, make it absolute
  # inside our jail directory
  ezjail_makeabsolute ezjail_rootdir ${ezjail_jaildir}

  # if a directory at the specified jail root already exists, refuse to
  # install. Empty root dirs are considered okay, sometimes they are
  # mount points to be filled by ezjail.
  [ -d "${ezjail_rootdir}" ] && [ -z "`ls -I ${ezjail_rootdir}`" ] && ezjail_rootdirempty="YES"
  [ -e "${ezjail_rootdir}" -a -z "${ezjail_rootdirempty}" -a -z "${ezjail_exists}" ] && exerr "Error: A file or a non empty directory already exists at the specified jail root ${ezjail_rootdir}.\n  Maybe you want to '${ezjail_admin} create -x' an existing jail?\n  Please specify another jail root with the -r switch."

  # if jail root specified on command line does not lie within our jail
  # directory, we need to create a softlink
  if [ "${ezjail_rootdir##${ezjail_jaildir}}" = "${ezjail_rootdir}" ]; then
    ezjail_softlink=${ezjail_jaildir}/`basename -- "${ezjail_rootdir}"`
    [ -e "${ezjail_softlink}" ] && ezjail_softlink=`mktemp -u "${ezjail_softlink}.XXXXXX"`
  fi

  # if no flavour specified on command line, use default flavour
  : ${ezjail_flavours=${ezjail_default_flavour}}

  # do some sanity checks on the selected flavour (if any)
  for ezjail_flavour in ${ezjail_flavours}; do
    [ -d "${ezjail_flavours_dir}/${ezjail_flavour}" ] || exerr "Error: Flavour config directory ${ezjail_flavours_dir}/${ezjail_flavour} not found.\n  Refer to ${ezjail_admin}s man page for details on flavours."
  done

  # check for restore circumstances, normally this is invoked by the restore command
  [ "${ezjail_fromarchive}" -a "${ezjail_exists}" ] && exerr "Error: You can not restore an archive over an existing jail.\n  '${ezjail_admin} delete -w ${ezjail_name}' the old version first."
  [ "${ezjail_fromarchive}" -a "${ezjail_flavour}" ] && exerr "Error: Cannot apply flavours to a jail being restored."
  [ "${ezjail_fromarchive}" -a "${ezjail_fromarchive}" != "-" -a ! -r "${ezjail_fromarchive}" ] && exerr "Error: No archive found at ${ezjail_fromarchive}."

  # Ensure existence of our control directory
  mkdir -p "${ezjail_jailcfgs}" || exerr "Error: ezjail can not create its control directory ${ezjail_jailcfgs}."

  #
  # All sanity checks that may lead to errors are hopefully passed here
  #

  if [ "${ezjail_imagetype}" ]; then
    # Strip trailing slashes from jail root, those would confuse image path
    ezjail_image=${ezjail_rootdir%/}; while [ "${ezjail_image}" -a -z "${ezjail_image%%*/}" ]; do ezjail_image=${ezjail_image%/}; done
    [ "${ezjail_image}" ] || exerr "Error: Could not determine image file name.\n  Something is wrong with the jail root: ${ezjail_rootdir}."

    # Location of our image file
    ezjail_image="${ezjail_image}.img"

    # zfs does not use image files
    [ "${ezjail_imagetype}" = "zfs" ] && unset ezjail_image

    # Prepare crypto jail so that an attacker cannot guess which blocks
    # have been written
    case ${ezjail_imagetype} in bde|eli) ezjail_sourcedevice="/dev/random";; simple) ezjail_sourcedevice="/dev/zero";; esac

    # If NOT exist and imagetype not ZFS, create image
    if [ -z "${ezjail_exists}" -a ${ezjail_imagetype} != "zfs" ]; then
      [ -e "${ezjail_image}" ] && exerr "Error: A file exists at ${ezjail_image}.\n  Won't overwrite an existing image."

      # Now create jail disc image
      touch "${ezjail_image}"
      echo "Creating jail image ${ezjail_image}. This may take a while."
      if [ "${ezjail_imageblockcount}" -gt 0 ]; then
        dd if="${ezjail_sourcedevice}" of="${ezjail_image}" bs=1m count=${ezjail_imageblockcount} || exerr "Error: Could not (or not fully) create the image file.\n  You might want to check (and possibly remove) the file ${ezjail_image}.\n  The image size provided was ${ezjail_imagesize}."
      fi
      if [ "${ezjail_imagerestbytes}" -gt 0  ]; then
        ( dd if="${ezjail_sourcedevice}" bs=${ezjail_imagerestbytes} count=1 >> "${ezjail_image}" ) || exerr "Error: Could not (or not fully) create the image file.\n  You might want to check (and possibly remove) the file ${ezjail_image}.\n  The image size provided was ${ezjail_imagesize}."
      fi

      # Attach device
      ezjail_imagedevice=`mdconfig -a -t vnode -f "${ezjail_image}"`
      ezjail_devicelink="${ezjail_rootdir}.device"

      [ $? -eq 0 ] || detach_images || exerr "Error: Could not attach image device.\n  Command failed was 'mdconfig -a -t vnode -f ${ezjail_image}'."
    fi

    case ${ezjail_imagetype} in
    bde|eli)
      # parse imageparams, generate attachparams
      ezjail_attachblocking="YES"
      if [ "${ezjail_imageparams}" ]; then
        ezjail_attachparams=`eval parse_g${ezjail_imagetype}_attach_args ${ezjail_imageparams}` || unset ezjail_attachblocking
      fi
      case ${ezjail_imagetype} in
      bde) init_cmd="gbde init /dev/${ezjail_imagedevice} ${ezjail_imageparams}"
           attach_cmd="gbde attach /dev/${ezjail_imagedevice} ${ezjail_attachparams}";;
      eli) init_cmd="geli init ${ezjail_imageparams} /dev/${ezjail_imagedevice}"
           attach_cmd="geli attach ${ezjail_attachparams} /dev/${ezjail_imagedevice}";;
      esac

      if [ -z "${ezjail_exists}" ]; then
        [ "${ezjail_attachblocking}" ] && echo "Initialising crypto device. You will be asked to enter a new passphrase twice... "
        ( echo ${init_cmd} | /bin/sh ) || detach_images || exerr "Error: Could not initialise crypto image."

        [ "${ezjail_attachblocking}" ] && echo "Attaching crypto device. You will be asked to enter the new passphrase... "
        ( echo ${attach_cmd} | /bin/sh ) || detach_images || exerr "Error: Could not attach crypto image."
      fi

      ezjail_device="${ezjail_imagedevice}.${ezjail_imagetype}"
      ;;
    simple)
      ezjail_device=${ezjail_imagedevice}
      ;;
    zfs)
      if [ -z "${ezjail_exists}" ]; then
        echo "ZFS: create the jail filesystem"
        if [ ${ezjail_imagesize} ]; then
          ezjail_zfs_jail_properies="-o quota=${ezjail_imagesize} -o compression=lzjb"
        fi
        [ -d "${ezjail_jaildir}/${ezjail_hostname}" ] && exerr "Error: Could not create jail root mount point ${ezjail_rootdir}"
        /sbin/zfs create -p -o mountpoint=${ezjail_rootdir} ${ezjail_zfs_jail_properies} ${ezjail_jailzfs}/${ezjail_hostname}
      else
        check_for_zfs_exist || exerr "Error: The existing destination is not a ZFS filesystem."
      fi
      ;;

    esac

    if [ -z "${ezjail_exists}" -a ${ezjail_imagetype} != "zfs" ]; then
      # Format memory image
      newfs -U "/dev/${ezjail_device}" || detach_images || exerr "Error: Could not newfs /dev/${ezjail_device}."
      # Create mount point and mount
      mkdir -p "${ezjail_rootdir}" || detach_images || exerr "Error: Could not create jail root mount point ${ezjail_rootdir}."
      mount "/dev/${ezjail_device}" "${ezjail_rootdir}" || detach_images || exerr "Error: Could not mount /dev/${ezjail_device} to ${ezjail_root}."
    else
      if [ -e "${ezjail_rootdir}" -a ! -d "${ezjail_rootdir}" ]; then
        [ "${ezjail_rootdir%%*.img}" ] || exerr "Error: Could not create mount point for your jails image.\n  A file exists at its location.\n  Try '${ezjail_admin} create -x -r ${ezjail_rootdir%%.img} ${ezjail_name} ${ezjail_ips}' instead."
        exerr "Error: Could not create mount point for your jails image.\n  A file exists at its location."
      fi
      [ -d "${ezjail_rootdir}" ] || mkdir -p "${ezjail_rootdir}"
    fi
  fi

  if [ "${ezjail_fromarchive}" ]; then
    unset ezjail_archive_opt
    ezjail_makeabsolute ezjail_fromarchive
    [ "${ezjail_fromarchive}" = "-" ] && unset ezjail_archive_opt || ezjail_archive_opt="-f ${ezjail_fromarchive}"
    mkdir -p "${ezjail_rootdir}" && cd "${ezjail_rootdir}" && pax -rz -pe ${ezjail_archive_opt} -s:^ezjail:.: ezjail/*
    [ $? -eq 0 ] || detach_images || exerr "Error: Could not extract archive from ${ezjail_fromarchive}."
  elif [ -z "${ezjail_exists}" ]; then
    # now take a copy of our template jail
    if [ "${ezjail_imagetype}" = "zfs" -a "${ezjail_use_zfs}" = "YES" ]; then
      # create ZFS filesystem first when using ZFS
      /sbin/zfs snapshot ${ezjail_jailzfs}/newjail@_createnewjailtmp
      /sbin/zfs send ${ezjail_jailzfs}/newjail@_createnewjailtmp | zfs receive -F ${ezjail_jailzfs}/${ezjail_hostname}
      /sbin/zfs destroy ${ezjail_jailzfs}/${ezjail_hostname}@_createnewjailtmp
      /sbin/zfs destroy ${ezjail_jailzfs}/newjail@_createnewjailtmp
    else
      mkdir -p "${ezjail_rootdir}" && cd "${ezjail_jailtemplate}" && find . | cpio -p -v "${ezjail_rootdir}" > /dev/null
    fi

    [ $? -eq 0 ] || detach_images || exerr "Error: Could not copy template jail."
  fi

  # if a soft link is necessary, create it now
  [ "${ezjail_softlink}" ] && ln -fs "${ezjail_rootdir}" "${ezjail_softlink}"

  # if the automount feature is not disabled, this fstab entry for new jail
  # will be obeyed
  echo -n > /etc/fstab.${ezjail_safename}
  if [ "${ezjail_imagetype}" -a "${ezjail_imagetype}" != "zfs" ] ; then
    echo ${ezjail_devicelink} ${ezjail_rootdir} ufs rw 0 0 >> "/etc/fstab.${ezjail_safename}"
  fi
  echo ${ezjail_jailbase} ${ezjail_rootdir}/basejail nullfs ro 0 0 >> "/etc/fstab.${ezjail_safename}"

  # now, where everything seems to have gone right, create control file in
  # ezjails config dir
  writejailinfo "${ezjail_config}" "${ezjail_fromarchive_config}"

  # Final steps for flavour installation
  if [ -z "${ezjail_exists}" ]; then
    installed_flavours=0
    for ezjail_flavour in ${ezjail_flavours}; do
      # install files and config to new jail
      cd "${ezjail_flavours_dir}/${ezjail_flavour}" && find . | cpio -p -u -v "${ezjail_rootdir}" > /dev/null
      [ $? -eq 0 ] || echo "Warning: Could not fully install flavour ${ezjail_flavour}."

      # if the packages are links and not files we have to copy them now
      find "${ezjail_rootdir}/pkg/" -type l -exec cp -r -f {} {}.ezjail \; -exec mv {}.ezjail {} \;

      # If a config is found, make it auto run on jails startup
      if [ -f "${ezjail_rootdir}/ezjail.flavour" ]; then
        chmod 0755 "${ezjail_rootdir}/ezjail.flavour"
        mv "${ezjail_rootdir}/ezjail.flavour" "${ezjail_rootdir}/ezjail.flavour".`printf %04d $(( installed_flavours+=1 ))`
        echo "Note: Shell scripts for flavour ${ezjail_flavour} installed, flavourizing on jails first startup."
      fi

      cat > "${ezjail_rootdir}/etc/rc.d/ezjail-config" <<"EOF"
#!/bin/sh
#
# BEFORE: DAEMON
# PROVIDES: ezjail-config
#
case "$1" in
  *start)
    rm -f "/etc/rc.d/ezjail-config"
    for ezjail_flavour in /ezjail.flavour.*; do
      [ -x "${ezjail_flavour}" ] && "${ezjail_flavour}"
      rm -f "${ezjail_flavour}"
    done
  ;;
  *)
  ;;
esac
EOF
    chmod 0755 "${ezjail_rootdir}/etc/rc.d/ezjail-config"
    done
  fi

  # Detach (crypto and) memory discs
  detach_images keep

  #
  # For user convenience some scenarios commonly causing headaches are checked
  #

  TIFS=${IFS}; IFS=,
  for ezjail_ip in ${ezjail_ips}; do
    # check, whether IP is configured on a local interface, warn if it isnt
    ping -c 1 -m 1 -t 1 -q ${ezjail_ip} > /dev/null
    [ $? -eq 0 ] || echo "Warning: IP ${ezjail_ip} not configured on a local interface."

    # check, whether some host system services do listen on the Jails IP
    IFS=_
    ezjail_listener=`sockstat -4 -l | grep "${ezjail_ip}:[[:digit:]]"`
    [ $? -eq 0 ] && echo -e "Warning: Some services already seem to be listening on IP ${ezjail_ip}\n  This may cause some confusion, here they are:\n${ezjail_listener}"

    ezjail_listener=`sockstat -4 -l | grep "*:[[:digit:]]"`
    [ $? -eq 0 ] && echo -e "Warning: Some services already seem to be listening on all IP, (including ${ezjail_ip})\n  This may cause some confusion, here they are:\n${ezjail_listener}"
    IFS=,
  done
  IFS=${TIFS}

  [ "${ezjail_imagetype}" -a "${ezjail_imagetype}" != "zfs" ] && echo "Note: To administrate your image jail, attach it using the '${ezjail_admin} config -i attach ${ezjail_hostname}' command."
  ;;
######################## ezjail-admin DELETE ########################
delete)
  # Clean variables, prevent polution
  unset ezjail_wipeme ezjail_forcestop

  shift; while getopts :wf arg; do case ${arg} in
    w) ezjail_wipeme="YES";;
    f) ezjail_forcestop="YES";;
    ?) exerr ${ezjail_usage_delete};;
  esac; done; shift $(( $OPTIND - 1 ))

  # we need name of jail to vanish
  [ $# -eq 1 ] || exerr ${ezjail_usage_delete}

  # Get all info we have on that jail
  fetchjailinfo $1

  # check for existence of jail in our records
  [ "${ezjail_config}" ] || exerr "Error: Nothing known about jail ${ezjail_name}."

  # check for an active ZFS zpool
  if [ "${ezjail_imagetype}" = "zfs" ]; then
    check_for_zpool
  fi

  if [ "${ezjail_id}" ]; then
    # if jail is still running, refuse to go any further
    [ "${ezjail_forcestop}" ] || exerr "Error: Jail appears to be still running.\n  '${ezjail_admin} stop ${ezjail_name}' it first or use '${ezjail_admin} delete -f ${ezjail_name}' to force stop."

    # This one will also exerr on failure
    start_stop_jail_by_script onestop
  fi

  if [ "${ezjail_attached}" ]; then
    # if jail is attached and detach is not forced, refuse to go any further
    [ "${ezjail_forcestop}" ] || exerr "Error: Jail image file ${ezjail_image} is attached as ${ezjail_device}.\n  '${ezjail_admin} config -i detach ${ezjail_name}' it first, or use '${ezjail_admin} delete -f ${ezjail_name}' to force detach."

    detach_images keep

    # See, if it successfully detached
    fetchjailinfo ${ezjail_name}
    [ "${ezjail_attached}" ] && exerr "Error: Could not detach ${ezjail_name}.\n  You need to detach it by hand."
  fi

  # now we know everything we need to let the jail be gone. remove entry
  # from ezjail resource structure, delete fstab.JAILNAME
  rm -f "${ezjail_config}" "/etc/fstab.${ezjail_safename}"

  # if there is a soft link pointing to the jail root, remove it
  [ -L "${ezjail_softlink}" ] && rm -f "${ezjail_softlink}"

  # if wiping the jail was requested, remove it
  if [ "${ezjail_wipeme}" ]; then
    case ${ezjail_imagetype} in
    simple|bde|eli)
     [ "${ezjail_image}" ] && rm -f "${ezjail_image}" "${ezjail_image%.img}.device"
    ;;
    zfs)
      echo "ZFS: delete the jails ZFS"
      /sbin/zfs destroy -r ${ezjail_jailzfs}/${ezjail_hostname}
    ;;
    esac
    rm -rf "${ezjail_rootdir}"
  fi

  ;;
######################## ezjail-admin LIST ########################
list)
  [ $# -eq 1 ] || exerr ${ezjail_usage_list}
  unset ezjail_list

  [ -d "${ezjail_prefix}/etc/ezjail/" ] && cd "${ezjail_prefix}/etc/ezjail/" && ezjail_list=`ls | xargs rcorder`

  printf "%-3s %-4s %-15s %-30s %s\\n" STA JID IP Hostname "Root Directory"
  echo   "--- ---- --------------- ------------------------------ ------------------------"
  for ezjail in ${ezjail_list}; do
    fetchjailinfo ${ezjail%.norun}
    case ${ezjail_imagetype} in simple) ezjail_state="I";; bde) ezjail_state="B";; eli) ezjail_state="E";; *) ezjail_state="D";; esac
    if [ "${ezjail_id}" ]; then
      ezjail_state="${ezjail_state}R"
    else
      [ "${ezjail_attached}" ] && ezjail_state="${ezjail_state}A" || ezjail_state="${ezjail_state}S"
    fi
    [ "${ezjail_safename}" != "${ezjail}" ] && ezjail_state="${ezjail_state}N"

    TIFS=${IFS}; IFS=,; unset _multiline
    for ezjail_ip in ${ezjail_ips:="-"}; do
      if [ -z "${_multiline}" ]; then
        printf "%-3s %-4s %-15s %-30s %s\\n" "${ezjail_state}" "${ezjail_id:-N/A}" "${ezjail_ip}" "${ezjail_hostname}" "${ezjail_rootdir}"
        _multiline=yes
      else
        printf "    %-4s %s\\n" "${ezjail_id:-N/A}" "${ezjail_ip}"
      fi
    done
    IFS=${TIFS}
  done

  ;;
######################## ezjail-admin UPDATE ########################
setup|update)
  # Clean variables, prevent polution
  unset ezjail_provideports ezjail_installaction

  shift; while getopts :biupPs: arg; do case ${arg} in
    b) ezjail_installaction="buildworld installworld";;
    i) ezjail_installaction="installworld";;
    u) ezjail_installaction="freebsd-update";;
    s) ezjail_sourcetree=${OPTARG};;
    P) ezjail_provideports="YES"; ezjail_installaction="none";;
    p) ezjail_provideports="YES";;
    ?) exerr ${ezjail_usage_update};;
  esac; done; shift $(( ${OPTIND} - 1 ))

  [ $# -eq 0 ] || exerr ${ezjail_usage_update}

  # Check if some action was requested
  [ "${ezjail_installaction}" ] || exerr "Error: No install action has been chosen.\n  Please note that ezjails behaviour changed. Rebuilding the world no longer is default.\n  Run '${ezjail_admin} update -b' to build and install a world from source or '${ezjail_admin} update -i' to install an already built world."

  if [ "${ezjail_use_zfs}" = "YES" ]; then
    check_for_zpool
    zfs create -p -o mountpoint=${ezjail_jaildir} ${ezjail_jailzfs}
  fi

  if [ "${ezjail_installaction}" = "none" ]; then
    # check, whether ezjail has been setup correctly. existence of
    # ezjail_jailbase is our indicator
    [ -d "${ezjail_jailbase}" ] || exerr "Error: base jail does not exist.\n  You cannot fill base jails ports tree before creating it.\n  Please run '${ezjail_admin} update' or '${ezjail_admin} install' first."
  elif [ "${ezjail_installaction}" = "freebsd-update" ]; then
    [ -d "${ezjail_jailbase}" ] || exerr "Error: base jail does not exist.\n  You cannot update a base jail until it is created.\n  Please run '${ezjail_admin} update' or '${ezjail_admin} install' first."

    # If ran from cron be kind to freebsds update servers and sleep first
    [ -z "$TERM" -o "$TERM" = "dumb" ] && ezjail_urgency="cron" || ezjail_urgency="fetch"
    [ "${ezjail_use_zfs}" = "YES" ] && zfs snapshot ${ezjail_jailzfs}/basejail@`date -v -7d +"%C%y%m%d_%H:%M:%S"`
    freebsd-update -b ${ezjail_jailbase} ${ezjail_urgency} install
  else
    # Bump the user for some of the most common errors
    [ -d "${ezjail_sourcetree}" ] || exerr "Error: Cannot find your copy of the FreeBSD source tree in ${ezjail_sourcetree}.\n  Consider using '${ezjail_admin} install' to create the base jail from an ftp server."
    [ -e "${ezjail_sourcetree}/Makefile" ] || exerr "Error: Your source tree in ${ezjail_sourcetree} seems to be incomplete (Makefile is missing)."
    [ "`sysctl -n kern.securelevel`" -gt 0 ] && exerr "Error: You are running in a secure level higher than 0.\n  ${ezjail_admin} will not update correctly.\n  Please reboot into a lower secure level."

    # Normally fulljail should be renamed by past ezjail-admin commands.
    # However those may have failed
    if [ "${ezjail_use_zfs}" = "YES" ]; then
      echo "ZFS: manage basejail and newjail"
      [ -d "${ezjail_jailfull}" ] && /sbin/zfs destroy -R "${ezjail_jailzfs}/fulljail"  && rm -rf "${ezjail_jailfull}"
      [ ! -d " ${ezjail_jaildir}" ] && /sbin/zfs create -p -o mountpoint=${ezjail_jaildir} ${ezjail_zfs_properties} ${ezjail_jailzfs}
      /sbin/zfs create "${ezjail_jailzfs}/fulljail" || exerr "Error: Cannot create temporary Jail directory."
    else
      [ -d "${ezjail_jailfull}" ] && chflags -R noschg "${ezjail_jailfull}" && rm -rf "${ezjail_jailfull}"
      mkdir -p "${ezjail_jailfull}" || exerr "Error: Cannot create temporary Jail directory."
    fi

    # make and setup our world, then split basejail and newjail
    cd "${ezjail_sourcetree}" && env DESTDIR="${ezjail_jailfull}" make ${ezjail_installaction} || exerr "Error: The command 'make ${ezjail_installaction}' failed.\n  Refer to the error report(s) above."
    cd "${ezjail_sourcetree}/etc" && env DESTDIR="${ezjail_jailfull}" make distribution || exerr "Error: The command 'make distribution' failed.\n  Refer to the error report(s) above."
    ezjail_splitworld

  fi # installaction="none"

  # Provide a copy of ports tree in basejail
  [ "${ezjail_provideports}" ] && ezjail_updateports

  ;;
######################## ezjail-admin INSTALL ########################
install)
  # Clean variables, prevent polution
  unset ezjail_release ezjail_installmanpages ezjail_installports ezjail_installsources ezjail_dir ezjail_reldir ezjail_ftpserverqueried

  shift; while getopts :mMpPsSh:r: arg; do case ${arg} in
    m) ezjail_installmanpages=" manpages";;
    M) ezjail_installmanpages=" manpages"; unset ezjail_basesystem;;
    s) ezjail_installsources=" src";;
    S) ezjail_installsources=" src"; unset ezjail_basesystem;;
    p) ezjail_installports="YES";;
    P) ezjail_installports="YES"; unset ezjail_basesystem;;
    h) ezjail_ftphost=${OPTARG};;
    r) ezjail_release=${OPTARG};;
    ?) exerr ${ezjail_usage_install};;
  esac; done; shift $(( ${OPTIND} - 1 ))

  [ $# -eq 0 ] || exerr ${ezjail_usage_install}

  ezjail_installarch=`uname -p`
  : ${ezjail_ftphost="ftp.freebsd.org"}
  ezjail_ftphost=${ezjail_ftphost#ftp://}
  ezjail_dir=${ezjail_ftphost#file://}
  [ "${ezjail_dir%%[!/]*}" ] || ezjail_reldir=`pwd -P`

  [ "`sysctl -n kern.securelevel`" -gt 0 ] && exerr "Error: You are running in a secure level higher than 0.\n  ${ezjail_admin} will not install correctly.\n  Please reboot into a lower secure level."

  # Check for basejail when not installing base jail
  [ "${ezjail_basesystem}" -o -d "${ezjail_jailbase}" ] || exerr "Error: The basejail does not exist.\n  You cannot install distribution packages before creating ezjails environment.\n  Please run '${ezjail_admin} update' or '${ezjail_admin} install' using lower case parameters first."

  # ftp servers normally wont provide non-RELEASE-builds
  if [ -z "${ezjail_release}" -a "${ezjail_dir}" = "${ezjail_ftphost}" ]; then
    ezjail_release=`uname -r`
    case ${ezjail_release} in *-STABLE) ezjail_release="${ezjail_release%-STABLE}-RELEASE";; esac
    if [ "${ezjail_release%-RELEASE}" = "${ezjail_release}" ]; then
      echo "Your system is ${ezjail_release}. Normally FTP-servers don't provide non-RELEASE-builds."
      ezjail_queryftpserver || echo "... I'll continue anyway."
      echo -n "Release [ ${ezjail_release} ]: "
      read ezjail_releasetmp
      [ "${ezjail_releasetmp}" ] && ezjail_release=${ezjail_releasetmp}
    fi
  fi

  # Normally fulljail should be renamed by past ezjail-admin commands.
  # However those may have failed
  if [ "${ezjail_use_zfs}" = "YES" ]; then
    check_for_zpool
    echo "ZFS: manage basejail and newjail"
    [ -d "${ezjail_jailfull}" ] && /sbin/zfs destroy -R "${ezjail_jailzfs}/fulljail"  && rm -rf "${ezjail_jailfull}"
    [ ! -d " ${ezjail_jaildir}" ] && /sbin/zfs create -p -o mountpoint=${ezjail_jaildir} ${ezjail_jailzfs}
    /sbin/zfs create -p "${ezjail_jailzfs}/fulljail" || exerr "Error: Cannot create temporary Jail directory."
  else
    [ -d "${ezjail_jailfull}" ] && chflags -R noschg "${ezjail_jailfull}" && rm -rf "${ezjail_jailfull}"
    mkdir -p "${ezjail_jailfull}" || exerr "Error: Cannot create temporary Jail directory."
  fi
  DESTDIR=${ezjail_jailfull}

  rm -rf "${ezjail_jailtemp}"
  for pkg in ${ezjail_basesystem} ${ezjail_installmanpages} ${ezjail_installsources}; do

    # The first case means, that a remote host has been specified.
    if [ "${ezjail_dir}" = "${ezjail_ftphost}" ]; then
      # Create and try to access temp dir
      mkdir -p "${ezjail_jailtemp}" || exerr "Error: Could not create temporary base jail directory ${ezjail_jailtemp}."
      cd "${ezjail_jailtemp}" || exerr "Error: Could not cd to ${ezjail_jailtemp}."

      # Try all paths as stolen from sysinstall, break on success.
      for ezjail_path in pub/FreeBSD/releases pub/FreeBSD/snapshot pub/FreeBSD releases snapshots NO; do
        if [ "${ezjail_path}" = "NO" ]; then
          echo -e "\nCould not fetch ${pkg} from ${ezjail_ftphost}.\n  Maybe your release (${ezjail_release}) is specified incorrectly or the host ${ezjail_ftphost} does not provide that release build.\n  Use the -r option to specify an existing release or the -h option to specify an alternative ftp server." >&2
          [ "${ezjail_ftpserverqueried}" ] || ezjail_queryftpserver
          exit 1
        fi
        ftp "${ezjail_ftphost}:${ezjail_path}/${ezjail_installarch}/${ezjail_release}/${pkg}/*" && break
      done

      # These actions are really ugly: sources want $1 to contain the set
      # of sources to install, base asks the user if he is sure, hence the
      # yes and the set -- all
      [ "${pkg}" = "base" ] && echo "Ignore the next question, ezjail answers it for you."
      set -- all
      [ -f install.sh ] && yes | . install.sh
      [ $? -eq 0 ] || exerr "Error: Package install script for ${pkg} failed."

      rm -rf "${ezjail_jailtemp}"
    else
      cd "${ezjail_reldir}/${ezjail_dir}/${pkg}" || exerr "Error: Could not cd to ${ezjail_dir}."
      set -- all
      [ -f install.sh ] && yes | . install.sh
      [ $? -eq 0 ] || exerr "Error: Package install script for ${pkg} failed."
    fi
  done

  # Split basejail and newjail
  [ "${ezjail_basesystem}" ] && ezjail_splitworld

  # Fill ports, if requested
  [ "${ezjail_installports}" ] && ezjail_updateports

  ;;
######################## ezjail-admin SHORTCUT ########################
*start|*stop|*startcrypto|*stopcrypto)
  [ -x "${ezjail_prefix}/etc/rc.d/ezjail" ] && exec "${ezjail_prefix}/etc/rc.d/ezjail" $@
  [ -x "${ezjail_prefix}/etc/rc.d/ezjail.sh" ] && exec "${ezjail_prefix}/etc/rc.d/ezjail.sh" $@

  exerr "Error: Could not find ezjail's rc.d script in ${ezjail_prefix}/etc/rc.d/.\n  You need to type it the long way."
  ;;
######################## ezjail-admin CONSOLE ########################
console)
  # Clean variables, prevent polution
  unset ezjail_execute ezjail_forcestart

  shift; while getopts :e:f arg; do case ${arg} in
    e) ezjail_execute=${OPTARG};;
    f) ezjail_forcestart="YES";;
    ?) exerr ${ezjail_usage_console};;
  esac; done; shift $(( $OPTIND - 1 ))

  # we need name of jail to attach to
  [ $# -eq 1 ] || exerr ${ezjail_usage_console}

  # Get all info we have on that jail
  fetchjailinfo $1

  # check for existence of jail in our records
  [ "${ezjail_config}" ] || exerr "Error: Nothing known about jail ${ezjail_name}."

  # if jail is not running, we either try to force start it or fail
  if [ -z "${ezjail_id}" ]; then

    # If force start is requested, try that
    [ "$ezjail_forcestart}" ] || exerr "Error: Jail ${ezjail_name} appears not to be running\n  Start it first, or use '${ezjail_admin} console -f ${ezjail_name}' to force start."

    # This one will also exerr on failure
    start_stop_jail_by_script onestart
  fi

  # use the jails FIB if there is one
  if [ -n "${ezjail_fib}" ]; then
     _setfib="setfib -F ${ezjail_fib}"
  else
    _setfib=""
  fi

  # Try to attach to jail
  [ "${ezjail_execute}" ] && exec ${_setfib} jexec ${ezjail_id} ${ezjail_execute}

  exec ${_setfib} jexec ${ezjail_id} ${ezjail_default_execute}
  ;;
######################## ezjail-admin ARCHIVE ########################
archive)
  # Clean variables, prevent polution
  unset ezjail_archive ezjail_archive_tag ezjail_force ezjail_archivealljails ezjail_addfiles

  shift; while getopts :Afa:d: arg; do case ${arg} in
    f) ezjail_force="YES";;
    a) ezjail_archive=${OPTARG};;
    d) ezjail_archivedir=${OPTARG};;
    A) ezjail_archivealljails="YES";;
    ?) exerr ${ezjail_usage_archive};;
  esac; done; shift $(( ${OPTIND} - 1 ))

  # Specifying no jails only is acceptable if archiving all jails
  [ $# -lt 1 -a -z "${ezjail_archivealljails}" ] && exerr ${ezjail_usage_archive}

  # Default archive directory to .
  : ${ezjail_archivedir=`pwd -P`}

  # Will not backup more than one jail per archive
  [ "${ezjail_archive}" -a "${ezjail_archivealljails}" ] && exerr "Error: Must not specify an archive location for multiple archives.\n  Can not archive multiple jails into one archive."

  # Will not backup more than one jail per archive
  [ $# -gt 1 -a "${ezjail_archive}" ] && exerr "Error: Must not specify an archive location for multiple archives.\n  Can not archive multiple jails into one archive."

  # Either all or only some. Decide.
  [ $# -gt 0 -a "${ezjail_archivealljails}" ] && exerr "Error: Must not specify an ezjail to backup with -A.\n  Please use either '${ezjail_admin} archive -A' or '${ezjail_admin} archive $*'."

  # Fetch list of all ezjails
  [ "${ezjail_archivealljails}" -a -d "${ezjail_prefix}/etc/ezjail/" ] && cd "${ezjail_prefix}/etc/ezjail/" && set - `ls | xargs rcorder`

  for ezjail in $@; do
    unset ezjail_imagesize

    # Jail name mandatory
    fetchjailinfo ${ezjail%.norun}

    # Check for existence of jail in our records
    [ "${ezjail_config}" ] || exerr "Error: Nothing known about jail ${ezjail_name}."

    # If jail is still running, refuse to go any further - unless forced
    if [ "${ezjail_id}" -a -z "${ezjail_force}" ]; then
      echo -e "Warning: Jail ${ezjail_name} appears to be still running.\n  Stop it first, or use '${ezjail_admin} archive -f ${ezjail_name}' to force archiving."
      continue
    fi

    # Attach non-attached jails, if they can be attached non blocking
    if [ "${ezjail_imagetype}" -a "${ezjail_imagetype}" != "zfs" -a -z "${ezjail_attached}" ]; then
      if [ "${ezjail_attachblocking}" ]; then
        echo "Warning: Jail ${ezjail_name} is an image jail and can not be attached automatically."
        echo "         Use '${ezjail_admin} config -i attach ${ezjail_name}' to attach it first."
        continue
      fi
      mount_images
      ezjail_imagesize=-`stat -Lf %z "${ezjail_image}"`
    fi

    # This one goes into archive to identify jail by name and restore date
    ezjail_archive_tag="${ezjail_safename}-`date +%Y%m%d%H%M.%S`"

    # If no archive name was specified, make one up
    [ "${ezjail_archive}" ] || ezjail_archive="${ezjail_archive_tag}.tar.gz"

    # Archives need to know, where they came from. Restore by default only
    # reinstalls jails on the same machine. We also warn on OS upgrades and
    # processor type changes
    ezjail_hostsystem_name=$( echo -n `uname -n` | tr -c '[:alnum:].' _ )
    ezjail_hostsystem_version=$( echo -n `uname -r` | tr -c '[:alnum:].' _ )
    ezjail_hostsystem_cpu=$( echo -n `uname -p` | tr -c '[:alnum:].' _ )

    ezjail_archive_tag="${ezjail_archive_tag}-${ezjail_hostsystem_name}-${ezjail_hostsystem_version}-${ezjail_hostsystem_cpu}${ezjail_imagesize}"

    # If archive location is not absolute, prepend archive directory
    ezjail_makeabsolute ezjail_archive ${ezjail_archivedir}

    # It's a tar archive, after all
    case ${ezjail_archive} in
      *.tar.gz|*.tgz|-) ;;
      *) ezjail_archive="${ezjail_archive}.tar.gz";;
    esac

    # For stdout do specify nothing
    [ "${ezjail_archive}" = "-" ] && unset ezjail_archive_opt || ezjail_archive_opt="-f ${ezjail_archive}"

    [ -f "/etc/fstab.${ezjail_safename}" ] && ezjail_addfiles=/etc/fstab.${ezjail_safename}

    cd "${ezjail_rootdir}" || exerr "Error: Can't cd to ${ezjail_root}."
    pax -wzXt -x cpio ${ezjail_archive_opt} \
      -s:"^[^\\.].*/${ezjail_safename}\$":prop.ezjail-${ezjail_archive_tag}: \
      -s:"^[^\\.].*/${ezjail_safename}.norun\$":prop.ezjail-${ezjail_archive_tag}.norun: \
      -s:"etc/fstab.${ezjail_safename}\$":fstab.ezjail: \
      -s:"^\\.":ezjail: \
      "${ezjail_config}" ${ezjail_addfiles} .

    ezjail_paxresult=$?

    # Detach previously attached jail
    [ "${ezjail_imagesize}" ] && detach_images keep

    # An error on a jail not running is bad
    [ ${ezjail_paxresult} -eq 0 -o "${ezjail_force}" ] || echo "Warning: Archiving jail ${ezjail_name} was not completely successful.\n  Please refer to the output above for problems the archiving tool encountered.\n  You may ignore reports concerning setting access and modification times.\n  You might want to check and remove ${ezjail_archive}."

    # When archiving a running jail, some errors might occur
    [ ${ezjail_paxresult} -eq 0 ] || echo "Warning: Archiving jail ${ezjail_name} was not completely successful. For a running jail this is not unusual."

    unset ezjail_archive ezjail_archive_opt ezjail_addfiles
  done
  ;;
####################### ezjail-admin RESTORE ########################
restore)
  # Clean variables, prevent polution
  unset ezjail_archivedir ezjail_safename ezjail_forcerestore

  shift; while getopts :d:f arg; do case ${arg} in
    d) ezjail_archivedir=${OPTARG};;
    f) ezjail_forcerestore="YES";;
    ?) exerr ${ezjail_usage_restore};;
  esac; done; shift $(( ${OPTIND} - 1 ))

  [ $# -eq 0 ] && exerr ${ezjail_usage_restore}

  # Default archive directory to .
  : ${ezjail_archivedir=`pwd -P`}

  for ezjail_fromarchive in $@; do
    unset ezjail_safename ezjail_imagedata ezjail_nameprop

    # if archive location is absolute and doesn't exist, fail
    [ "${ezjail_fromarchive%%[!/]*}" -a ! -f "${ezjail_fromarchive}" ] && exerr "Error: Archive ${ezjail_fromarchive} not found."
    if [ -z "${ezjail_fromarchive%%[!/]*}" ]; then
      # Try archive location
      if [ -r "${ezjail_archivedir}/${ezjail_fromarchive}" ]; then
        ezjail_fromarchive="${ezjail_archivedir}/${ezjail_fromarchive}"
      else
        # If archive is not found, try guessing by jail name
        ezjail_safename=`echo -n "${ezjail_fromarchive}" | tr -c '[:alnum:]' _`
        unset ezjail_fromarchive
        for ezjail_archive in "${ezjail_archivedir}/${ezjail_safename}"*; do
          [ -z "${ezjail_fromarchive}" -a -f "${ezjail_archive}" ] && ezjail_fromarchive=${ezjail_archive}
          [ "${ezjail_archive}" -nt "${ezjail_fromarchive}" ] && ezjail_fromarchive=${ezjail_archive}
        done
        [ -f "${ezjail_fromarchive}" ] || exerr "Error: No archive for pattern ${ezjail_safename} can be found."
      fi
    fi

    # We want to parse some content from archive. In order to reduce
    # security implication this may have, we check owner and permission.
    #
    # However, this does not protect against admins transporting
    # archives over insecure lines over the net.
    [ `stat -f %u "${ezjail_fromarchive}"` -eq 0 ] || exerr "Error: Insecure ownership of archive ${ezjail_fromarchive}.\n  Please check the file and chown it to root if you trust its source."
    [ $(( `stat -f %OLp "${ezjail_fromarchive}"` & 0022 )) -eq 0 ] || exerr "Error: Insecure permissions for archive ${ezjail_fromarchive}.\n  Please check the file and fix permission (chmod og-w) if you trust its source."

    ezjail_nameprop=`pax -zn -f ${ezjail_fromarchive} prop.ezjail-\*`
    [ $? -eq 0 -a "${ezjail_nameprop}" ] || exerr "Error: File ${ezjail_fromarchive} is not an ezjail archive."

    # Figure out, what jail and jail enviroment archive claims to contain
    TIFS=${IFS}; IFS=-; set - ${ezjail_nameprop}
    ezjail_nameprop_safename=$2 ezjail_nameprop_hsname=$4 ezjail_nameprop_hsversion=$5 ezjail_nameprop_hscpu=$6 ezjail_nameprop_imgagesize=$7
    IFS=${TIFS}

    # Figure out current system environment
    ezjail_hsname=$( echo -n `uname -n` | tr -c '[:alnum:].' _ )
    ezjail_hsversion=$( echo -n `uname -r` | tr -c '[:alnum:].' _ )
    ezjail_hscpu=$( echo -n `uname -p` | tr -c '[:alnum:].' _ )

    # Catch all errors that will likely create a broken backup
    [ "${ezjail_safename}" -a "${ezjail_safename}" != "${ezjail_nameprop_safename}" ] && exerr "Error: Archive name ${ezjail_fromarchive} does not match archived jail ${ezjail_nameprop_safename}."
    [ "${ezjail_hsname}" != "${ezjail_nameprop_hsname}" -a -z "${ezjail_forcerestore}" ] && exerr "Error: Archive was created on host named ${ezjail_nameprop_hsname}.\n  Consider using '${ezjail_admin} create -a ${ezjail_fromarchive}' when migrating ezjails, or '${ezjail_admin} restore -f ${ezjail_fromarchive}' to force restore."
    [ "${ezjail_hscpu}" != "${ezjail_nameprop_hscpu}" -a -z "${ezjail_forcerestore}" ] && exerr "Error: Archive was created on a different CPU. Can not restore.\n  Consider using '${ezjail_admin} create -a ${ezjail_fromarchive}' when migrating ezjails, or '${ezjail_admin} restore -f ${ezjail_fromarchive}' to force restore."

    # Save config to tempfile and source it
    ezjail_config=`mktemp /tmp/ezjail.prop.XXXXXXXX`
    [ $? -ne 0 ] && exerr "Error: Can't create temporary file."
    pax -rzn -s:${ezjail_nameprop}:${ezjail_config}: -f ${ezjail_fromarchive} ${ezjail_nameprop}
    fetchjailinfo ${ezjail_safename} ${ezjail_config}

    # Now all parameters are here, invoke ezjail-admin create
    [ "${ezjail_rootdir}" -a "${ezjail_ips}" -a "${ezjail_hostname}" ] || exerr "Error: Archive does not contain a valid ezjail properties file.\n  Some jails properties are missing."
    # Setup the ezjail_imagedata.
    [ "${ezjail_imagetype}" ] && ezjail_imagedata="-c ${ezjail_imagetype} -C '${ezjail_attachparams}'"
    # Only use the imagesize if we really have one, ZFS imagejails don't necessarily have a size.
    [ "${ezjail_imagetype}" -a "${ezjail_nameprop_imgagesize}" ] && ezjail_imagedata="-c ${ezjail_imagetype} -C '${ezjail_attachparams}' -s ${ezjail_nameprop_imgagesize}"
    $0 create -a "${ezjail_fromarchive}" -A "${ezjail_config}" ${ezjail_imagedata} -r "${ezjail_rootdir}" "${ezjail_hostname}" "${ezjail_ips}" || exerr "Error: Create failed."
    rm -f "${ezjail_config}"

  done
  ;;
######################## ezjail-admin CONFIG ########################
config)
  # Clean variables, prevent polution
  unset ezjail_setrunnable ezjail_imageaction ezjail_new_name ezjail_new_zfs_datasets ezjail_new_cpuset ezjail_new_fib ezjail_old_config

  shift; while getopts :r:i:n:z:c:f: arg; do case ${arg} in
    i) ezjail_imageaction=${OPTARG};;
    r) ezjail_setrunnable=${OPTARG};;
    n) ezjail_new_name=${OPTARG};;
    z) ezjail_new_zfs_datasets=${OPTARG};;
    c) ezjail_new_cpuset=${OPTARG};;
    f) ezjail_new_fib=${OPTARG}
       [ "${ezjail_new_fib}" -ge 0 ] || exerr "Error: fib number has to be an integer.";;
    ?) exerr ${ezjail_usage_config};;
  esac; done; shift $(( ${OPTIND} - 1 ))

  [ $# -eq 1 ] || exerr ${ezjail_usage_config}

  # Jail name mandatory
  fetchjailinfo $1

  # Check for existence of jail in our records
  [ "${ezjail_config}" ] || exerr "Error: Nothing known about jail ${ezjail_name}."

  # Nothing to be configured?
  [ -n "${ezjail_setrunnable}" -o -n "${ezjail_new_name}" -o -n "${ezjail_imageaction}" -o -n "${ezjail_new_zfs_datasets}" -o -n "${ezjail_new_cpuset}" -o -n "${ezjail_new_fib}" ] || exerr ${ezjail_usage_config}

  [ -n "${ezjail_id}" -a -n "${ezjail_new_name}" ] && exerr "Error: Jail ${ezjail_name} appears to be still running.\n  '${ezjail_admin} stop ${ezjail_name}' it first."
  [ -n "${ezjail_id}" ] && [ -n "${ezjail_new_zfs_datasets}" -o -n "${ezjail_new_fib}" ] && echo "Warning: New settings for running jail ${ezjail_name} will only take effect when next restarting it."

  # Mark old config as source for new config written later
  [ -n "${ezjail_new_name}" -o -n "${ezjail_new_zfs_datasets}" -o -n "${ezjail_new_cpuset}" -o -n "${ezjail_new_fib}" ] && ezjail_old_config="${ezjail_config}"

  [ "${ezjail_new_zfs_datasets}" ] && ezjail_zfs_datasets="${ezjail_new_zfs_datasets}"
  [ "${ezjail_new_fib}" ] && ezjail_fib="${ezjail_new_fib}"
  if [ "${ezjail_new_cpuset}" ]; then
    # Configure the new cpuset if the jail is currently running
    [ "${ezjail_id}" ] && /usr/bin/cpuset -l ${ezjail_new_cpuset} -j ${ezjail_id} || exerr "Error: The defined cpuset is malformed."
    ezjail_cpuset="${ezjail_new_cpuset}"
  fi

  # Do we want a new name for our jail?
  if [ "${ezjail_new_name}" -a "${ezjail_new_name}" != "${ezjail_name}" ]; then
    # Cannot rename an attached jail
    [ "${ezjail_attached}" ] && exerr "Error: Jail image file ${ezjail_image} is attached as ${ezjail_device}.\n  '${ezjail_admin} config -i detach ${ezjail_name}' it first."

    # Save some old values
    ezjail_old_hostname="${ezjail_hostname}"
    ezjail_old_safename="${ezjail_safename}"
    ezjail_old_rootdir="${ezjail_rootdir}"
    ezjail_old_image="${ezjail_image}"

    # The new values for the jail
    ezjail_hostname=`echo -n ${ezjail_new_name} | tr '/~' '__'`
    ezjail_safename=`echo -n "${ezjail_new_name}" | tr -c '[:alnum:]' _`
    ezjail_config="${ezjail_jailcfgs}/${ezjail_safename}"
    [ "${ezjail_old_config}" = "${ezjail_old_config%.norun}" ] || ezjail_config="${ezjail_jailcfgs}/${ezjail_safename}.norun"

    # If rootdir is in our jails directory, and was auto generated, also rename the root
    if [ "${ezjail_old_rootdir}" = "${ezjail_jaildir}/${ezjail_old_hostname}" ]; then
      ezjail_rootdir=`dirname -- ${ezjail_rootdir}`/${ezjail_hostname}

      # since we just used the old rootdir prefix and added the new hostname,
      # we might end up at an existing directory
      [ -e "${ezjail_rootdir}" ] && exerr "Error: An object already exists at ${ezjail_rootdir}, cant rename."

      [ "${ezjail_imagetype}" = "zfs" ] || mv "${ezjail_old_rootdir}" "${ezjail_rootdir}"
    fi

    # This scenario really will only lead to real troubles in the 'fulljail'
    # case, but I should still explain this to the user and not claim that
    # "an ezjail would already exist"
    case ${ezjail_hostname} in basejail|newjail|fulljail|flavours|ezjailtemp) exerr "Error: ezjail needs the ${ezjail_hostname} directory for its own administrative purposes.\n  Please chose another name.";; esac

    # jail names may lead to identical configs, eg. foo.bar.com == foo-bar.com
    # so check, whether we might be running into problems
    [ -e "${ezjail_config}" -o -e "${ezjail_config}.norun" ] && exerr "Error: An ezjail config already exists at ${ezjail_config}.\n  Please chose another name."

    # need to rename the image?
    if [ "${ezjail_old_image}" ]; then
      # Do we have an auto generated image name? Then auto generate the new one
      if [ "${ezjail_old_rootdir}.img" = "${ezjail_old_image}" ]; then
        ezjail_image="${ezjail_rootdir}.img"
        [ -e "${ezjail_image}" ] && exerr "Error: An object already exists at ${ezjail_image}, cant rename image."
        mv "${ezjail_old_image}" "${ezjail_image}"
      else
        echo "Warning: Image file for jail ${ezjail_new_name} remains ${ezjail_image}, as it was not auto generated"
      fi
    fi

    # rename the filesystem, remounting is done by ZFS
    [ "${ezjail_imagetype}" = "zfs" ] && /sbin/zfs rename ${ezjail_jailzfs}/${ezjail_old_hostname} ${ezjail_jailzfs}/${ezjail_hostname} && /sbin/zfs set mountpoint=${ezjail_rootdir} ${ezjail_jailzfs}/${ezjail_hostname} && rmdir ${ezjail_old_rootdir}

    # rename fstab
    rm -f "/etc/fstab.${ezjail_old_safename}"
    echo -n > "/etc/fstab.${ezjail_safename}"
    [ "${ezjail_imagetype}" -a "${ezjail_imagetype}" != "zfs" ] && \
    echo ${ezjail_rootdir}.device ${ezjail_rootdir} ufs rw 0 0 >> "/etc/fstab.${ezjail_safename}"
    echo ${ezjail_jailbase} ${ezjail_rootdir}/basejail nullfs ro 0 0 >> "/etc/fstab.${ezjail_safename}"

    # usually that doesnt go smoothly, but the user wanted it
    # that way ;)
    echo "Jail has been renamed. You might want to check ${ezjail_config} and /etc/fstab.${ezjail_safename} to ensure everything has gone smoothly."
    echo "Also check settings in your Jail's /etc/ directory (especially /etc/rc.conf)."
  fi

  if [ "${ezjail_old_config}" ]; then
    ezjail_tmpconfig=`mktemp -u "${ezjail_config}".XXXXXX` || exerr "Error: Could not write new config.\n  You will have to manually fix ${ezjail_old_config}. Sorry."

    writejailinfo "${ezjail_tmpconfig}" "${ezjail_old_config}"
    mv "${ezjail_tmpconfig}" "${ezjail_config}"
    [ "${ezjail_config}" != "${ezjail_old_config}" ] && rm -f "${ezjail_old_config}"
  fi

  case "${ezjail_setrunnable}" in
    run)   [ "${ezjail_config}" = "${ezjail_config%.norun}" ] || mv "${ezjail_config}" "${ezjail_config%.norun}";;
    norun) [ "${ezjail_config}" = "${ezjail_config%.norun}" ] && mv "${ezjail_config}" "${ezjail_config}.norun";;
  esac

  [ "${ezjail_imageaction}" -a -z "${ezjail_image}" ] && exerr "Error: Jail ${ezjail_name} not an image jail."

  case "${ezjail_imageaction}" in
    attach)
      # Check, if image already attached
      [ "${ezjail_attached}" ] && exerr "Error: Jail image file ${ezjail_image} already attached as ${ezjail_device}."

      # Actually, just "attaching" is not enough, we need to mount
      mount_images
      ;;
    detach)
      # Check, if image really attached or running
      [ "${ezjail_id}" ] && exerr "Error: Jail ${ezjail_name} still running\n  Can not detach.\n  '${ezjail_admin} stop ${ezjail_name}' it first."
      [ "${ezjail_attached}" ] || exerr "Error: Jail image file ${ezjail_name} is not attached."

      # Unmount/detach everything
      detach_images keep
      ;;
    fsck)
      # Check, if image already attached
      [ "${ezjail_attached}" ] && exerr "Error: Jail image file ${ezjail_image} already attached as ${ezjail_device}."
      rm -f "${ezjail_devicelink}"

      # Attach images by type
      attach_images

      # Clean image
      fsck -t ufs "/dev/${ezjail_device}"

      # Detach images by type
      detach_images keep
      ;;
    esac
  ;;
*)
  exerr "${ezjail_usage_ezjailadmin}"
  ;;
esac
exit 0